Toro 139-3265 Installation Instructions

42in Recycler
TimeCutter
Model No. 139-3265
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
2
3
4
1
Preparing the Machine
No Parts Required
Procedure
1. Park the machine on a level surface.
2. Disengage the PTO, engage the parking brake,
and move the motion-control levers outward to
the N -L
EUTRAL OCK
3. Shut off the engine and remove the key.
© 2019—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
® 4275 Riding Mower
Description
No parts required
Baffle assembly
Flange nut (5/16 inch)
Carriage bolt (5/16 x 3/4 inch)
Decal
Mulching blade
position.
Register at www.Toro.com.
Kit
Qty.
–
1
4
2
1
2
2
Preparing the Mower Deck
No Parts Required
Procedure
1. Remove the mower deck from the machine;
refer to the Operator's Manual for the machine.
2. Turn the mower deck upside down.
3. Remove the existing mower blades; refer to the
Operator's Manual for the machine.
Form No. 3435-907 Rev A
Installation Instructions
Use
Prepare the mower deck.
Install the kit.
Install the decal and mulching blades.
Original Instructions (EN) All Rights Reserved *3435-907* A
Printed in the USA