Toshiba 40LV685D Service Manual page 8

ADJUSTMENT [LCD Color Television] ASIA_EU
E.g. If Bit D7-0 = 0101 1010, Hex data is 0x5A.
Exit from Service Mode
Pressing POWER button to turn off the TV once.
Initialization of TV Micro Data
After replacing Digital Board, the following initialization is required.
1) Enter Service Mode.
2) Select menu of ID by pressing P
Service Mode.
3) Change ID data into MODEL ID to initialize by pressing
"MODEL ID TABLE".
For example, if want to initialize 40LV685D, change MODEL ID into "0x3E".
Note:
MODEL ID is hex value.
4) Execute initialization of the memory.
Refer to "KEY FUNCTION IN THE SERVICE MODE".
Press "i+" + PROGRAMME
5) Enter Service Mode and select Version Check Mode. Confirm if the model name and
MODEL ID set is correct. If not, do over again from the start.
Note:
In case initialization by setting wrong MODEL ID is done, there is a possibility of
abnormal display.
6) Check the picture carefully. If necessary, adjust any adjustment item above.
Perform "Auto tune" on the owner's manual.
MODEL ID TABLE
file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.001\40L...
or P during display of adjustment menu in the
button on TV.
Стр. 7 из 24
+ or -, refer to
01.07.2015