Toshiba 40LV685D Service Manual page 22

ADJUSTMENT [LCD Color Television] ASIA_EU
Loading the Hotel Mode Settings from USB Drive to TV
1. Enter Hotel Clone menu as shown in previous section.
2. Select "USB to TV" by pressing
3. Insert the USB drive carrying the copied settings, and press OK to copy settings to the
TV.
4. After the copy is completed successfully, the message is shown and the set reboots
automatically.
5. Remove the USB drive.
6. If the copy is not completed, an error message is shown and the set does not reboot.
Repeat from step-a again, or repeat the steps of saving from TV to USB Drive.
LED Indications
The LEDs on the TV (at the bottom of the TV) indicate the TV's status, as described below.
There are 3 LEDS (from left to right): PowerOn/Standby, OnTimer, ProgramTimer.
PowerOn/Standby LED
Red ON (solid) = The TV power cord is plugged in, but TV is in Standby.
Green ON (solid) = The TV is powered on.
OnTimer LED
Green ON (solid) = The OnTimer is set.
file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.001\40L...
or buttons.
Стр. 21 из 24
01.07.2015