Table of Contents
Advertisement
ADJUSTMENT [LCD Color Television] ASIA_EU
FFH. The variable range depends on the adjusting item.
I2C Bus Off
Turn off I2C communication between IC500, IC210 and IC320.
1) Press and hold the i+ button on the remote control, then press the Volume
on the TV.
2) Display "BUS Off" OSD.
3) I2C communication turned off.
Note:
To return Bus on status, press and hold the i+ button on the remote control, then press the
Volume
+ button on the TV again. TV will be turned off and automatically turned on,
then status will be Bus On.
Setting TVOP
Enter to service mode and select menu of TVOP by pressing P
adjustment menu. After selecting TVOP, press
disable or enable as below.
TVOP
D5 (bit5) I2C check between TV-Micro and Standby-Micro (WDT) Disable Enable
Setting Panel Option Data
Panel option data is subject to OPT4.
Enter to service mode and select menu of OPT4 by pressing P
adjustment menu. After selecting OPT4, press
below.
Panel option data
file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa1.799\32X...
FUNCTION DESCRIPTION
or P
during display of
+ or
- to set I2C check function to
1
or P
during display of
+ or
- to set OPT4 value as table
Стр. 5 из 16
+ button
0 (Normal)
03.05.2015
Advertisement
Table of Contents
