Advertisement
DESCRIPTION
(see fig. 1)
A
ON/OFF button
B
+/- adjustment buttons
C
MODE button (selects the operating mode)
D
"ECO plus" button
E
Timer button
F
Swivel button
G
Remote control receiver
H Indicator light
I
Air intake grille
J
Filter
USE
Installation
The appliance can be used on any horizontal surface.
Do not overload the electrical circuit. Avoid using the same
outlet for other appliances.
Electrical connection
-
Before plugging the appliance into the outlet, check
that the outlet power corresponds to the value indi-
cated on the rating plate and that the outlet power is
adequate for the load.
-
THIS APPLIANCE COMPLIES WITH DIRECTIVE 2004/108/
EEC ON RADIO INTERFERENCE SUPPRESSION.
Operation and use
-
Plug into the outlet.
-
The appliance emits a beep. The indicator light (H)
comes on and remains lit while the appliance is pow-
ered.
-
Press the ON/OFF button (A) to turn the appliance on.
The appliance comes on with the setting used during
the previous period of operation.
-
Press the MODE button (C) to select one of the follow-
ing operating modes:
Fan
-
In this mode, only the fan operates and the appliance
does not heat the room.
-
Freeze prevention
In this mode, the appliance keeps the room at a tem-
perature of 7°C (45°F) to avoid freezing.
Heating 1, 2 and Heating 3
-
In this mode, the desired temperature can be selected
by pressing the adjustment buttons + and – (B):
Heating 1 (low power)
l
The appliance operates at low power, reducing noise
levels and energy consumption to a minimum.
Heating 2 (medium power)
l
The appliance operates at medium power.
Heating 3 (high power)
l
The appliance operates at high power to heat the room
rapidly.
Please note: Room temperature can be displayed in
either °F or °C.
To change the unit of measurement for the temperature,
press the + button for approx. 10 seconds, then release.
"ECO plus" function
The "ECO plus" function is available in Heating 1, 2 and 3
modes only. To activate the function, press the "ECO plus"
button (D). When this function is active the appliance auto-
matically sets the most appropriate power level to guaran-
tee optimum comfort while reducing energy consumption.
While the "ECO plus" function is active, the appliance may
switch automatically to a lower heating power than the one
displayed. This may happen a number of times in an hour.
Swivel button
To distribute the air flow over a wider surface, press the
swivel button (F)
and left.
To stop the appliance in the desired position, simply press
the swivel button (F) again.
Turn the appliance off
To turn the appliance off, press the ON/OFF button (A).
The display may show a countdown for about 6 seconds.
Digital 24 h timer (selection from 0.5 hrs to 24 hrs)
This function can be activated from any operating mode.
Auto-start: with the appliance in ON/OFF, press the timer
button
(E) . The
the time remaining before the appliance comes on. To ad-
just the timer, use the adjustment buttons + and - (B), then
wait a few seconds for the setting to be stored. The stand-
by light (H) is displayed together with the
cating that the timer has been set. When the programmed
time is reached, the appliance comes on with the settings
used during the previous period of operation.
Auto-off: with the appliance on, press the timer button
(E). The
symbol is displayed together with the time
remaining before the appliance goes off.
To set the timer, use the adjustment buttons + and - (B),
13
. The appliance swivels to the right
symbol is displayed together with
symbol, indi-
Advertisement
