Your box contains: Faucet Filter Feed Water with Assembly Adapter accessories Quick Fitting Red & blue Wrench Use Guide Elbow tubing Connector Know your filter Stage 3 Stage 2 Stage 1 Specifications ATTRIBUTE VALUE Temperature Range 40°F - 90°F Service Flow 1.5 gpm Rated Capacity 1500 gallons...
Tools & Materials Required for Installation • Drill with 1/2″ Drill Bit (type as required) if faucet needs to be mounted • Adjustable Open-End Wrenches • Phillips and Flat Blade Screwdrivers • Feed water supply valve and adapter Installing your filter IMPORTANT - Install or store where it will not be exposed to temperatures below freezing or exposed to any type of weather.
- Do not install on HOT WATER. Temperature of water supply to the filter system must be between minimum of 40°F and maximum of 90°F. - The assembly can stand up in the sink cabinet or can be hung on screws.
Page 5
Faucet Connection 1. Carefully select the faucet location making sure: • the faucet base fits flat against the surface at the selected location so the gasket will seal. • the faucet stud will be accessible from below once the hole is completed.
Connection to the Filter Assembly Quick Fitting Your filter comes pre-assembled with filters. You only need to attach the quick fitting elbow connectors to inlet and outlet of the filter assembly and insert the tubes in these elbow connectors and the system will be ready for use.
Replacing Filter Cartridge This filter system contains replaceable components called filter cartridges critical to efficiency of the system. Replacement of these cartridges should be with one of identical specifications to assure same efficiency and contaminant reduction performance. 1. Shut off the feed water to the system by turning the saddle valve on the water supply adapter clockwise until it stops.
Technical Support At Anchor USA, we are always here to help you. With 24-hour access to our company contact web page, you can drop a message or email us directly anytime, and one of our representatives will respond to your query in less than 24-hrs.
Need help?
Do you have a question about the AF-4003 and is the answer not in the manual?
Questions and answers