Anchor AF-4003 Quick Setup Manual

Anchor AF-4003 Quick Setup Manual

Under counter water filter system
Hide thumbs Also See for AF-4003:

Advertisement

Quick Links

UNDER COUNTER
WATER FILTER SYSTEM
Quick Setup Guide
Model# AF-4003

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AF-4003 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Anchor AF-4003

  • Page 1 UNDER COUNTER WATER FILTER SYSTEM Quick Setup Guide Model# AF-4003...
  • Page 2: Know Your Filter

    Your box contains: Faucet Box Filter Feed Water with Assembly Adapter accessories Quick Fitting Red & blue Elbow Wrench Use Guide tubing Connector Know your filter Stage 3 Stage 2 Stage 1 Specifications ATTRIBUTE VALUE Temperature Range 40°F - 100°F Service Flow 1.5 gpm Rated Capacity...
  • Page 3: Tools & Materials Required For Installation

    Tools & Materials Required for Installation Faucet • Drill with 1/2″ Drill Bit (type as required) if faucet needs to be mounted • Adjustable Open-End Wrenches Blue • Phillips and Flat Blade Screwdrivers Tubing • Feed water supply valve and adapter Installing your filter IMPORTANT - Install or store where it will not be exposed to temperatures below...
  • Page 4: Faucet Installation

    Installation 1. Faucet Installation 1) While selecting location for faucet, make sure faucet base fits flat against the surface at the selected location so the gasket will seal, and the faucet stud is accessible from below. 2) Slide Escutcheon chrome plate and large rubber gasket onto stem of faucet and place faucet onto sink with stem going through the hole.
  • Page 5 2. Feed-Water Supply Installation CAUTION: The water supply to the unit MUST be from the COLD-WATER LINE. HOT WATER will severely damage the system. 1) Locate the cold water (angle) shut off valve (see picture below) underneath the sink and turn it off. Open the cold-water faucet to release the pressure.
  • Page 6: Start-Up Procedure

    Connection to the Filter Assembly Your filter assembly comes pre-installed with filter cartridges. You only need to attach the quick fitting elbow connectors to inlet and outlet of the filter assembly and attach feed water and faucet tubes to them. Once connected, the system will be ready for use.
  • Page 7: Replacing Filter Cartridge

    Replacing Filter Cartridge This filter system contains replaceable components called filter cartridges critical to efficiency of the system. Replacement of these cartridges should be with one of identical specifications to assure same efficiency and contaminant reduction performance. STEPS: 1. Shut off the feed water to the system by turning the knob on water supply adapter clockwise until it stops.
  • Page 8: Register Your Product

    Technical Support At Anchor USA, we are always here to help you. With 24-hour access to our company contact web page, you can drop a message or email us directly anytime, and one of our representatives will respond to your query in less than 24-hrs.

Table of Contents