Summary of Contents for Dinex Smart-Therm STS 3 DXSMA2081
Page 1
Introduction ....................................2 Installation ....................................2 Operating Instructions .................................. 3 Troubleshooting .................................... 4 Maintenance ....................................4 ® Dinex Warranty ................................... 4 888.673.4639 For Service Information call 1. Please provide following information: • Model number • Serial number (from bottom of unit) Manual No.
Page 2
ATTENTION: Use of this symbol identifies a potentially hazardous 3. Do not place foreign objects on the charger, or between the Dinex situation which, if not avoided, may result in damage to the machine base and the charger surface. Foreign objects may heat within the or injury to the operator.
Page 3
“WAITING FOR BASE” indicating the Smart•Therm STS III Charger is turned on and ready for use. 3. Place a Dinex Smart base on the charger within the positioning rails, making sure the base is seated flat on the top. Charging will start automatically.
Page 4
(the “Customers”) that purchase the Warranted Products from Dinex or its authorized distributors. For the Do not use steel wool, abrasive cleaners, or chlorinated cleaners on purpose of these warranties, a defect is determined by Dinex after its the charger. good faith investigation.
Page 5
(v) the use of the Warranted Product in a manner or environment, Services. Dinex warrants that any service it provides to Customer will or for any purpose, for which Dinex did not design or license it, or be performed by trained individuals in a workmanlike manner.
Need help?
Do you have a question about the Smart-Therm STS 3 DXSMA2081 and is the answer not in the manual?
Questions and answers