Safety ..............2 Error Conditions ..........7 Installation ............3 Maintenance ............8 Operation Instructions ........4 Dinex Warranty ..........9 User Interface ............ 4 For Service Information, call 1-888-673-4639 Please provide the following information: • Model number • Serial number (from bottom of unit)
® ATTENTION: Installation of this equipment system, when used within a controlled hot should be performed only by persons food trayline process and covered with Dinex ® qualified or licensed to install electrical insulated domes, will keep hot plated food equipment.
4. Do not place foreign objects on the charger, or between the Dinex base and the charger IMPORTANT: The following instructions surface. Foreign objects may heat within reduce the risk of fire, electrical shock, or the induction field and cause damage to the injury.
OPERATION CAUTION: Please do not attempt to open INSTRUCTIONS the charger or perform service of any kind. This product can only be serviced by a Dinex Authorized Service Agent or ® DuraTherm Induction System designated Dinex personnel. Contact ®...
DuraTherm ™ 3. Place a Dinex DuraTherm or SmartTherm INFO: Fluctuations in voltage may affect ® heating time. base on the charger within the positioning rails. Assure the base is seated flat on 7. If the charger sees no activity for an the top.
® (for example, you may suppress the display for the warranty to remain valid, work must be of “Low Voltage” warnings during times of authorized by Dinex prior to being performed. ® heavy electrical demand where voltage on power lines may sag).
5 seconds, and plug it in 208V) again. If the error still persists, turn the charger 2. Set unit to OFF position – with DINEX in the off and call the Dinex Service Department at ®...
® DURATHERM™ CHARGER CLEANING INSTRUCTIONS Message: Critical Error! Time corrupted. Call Dinex Service (888) 673-4639. 9 1. Unplug the charger before cleaning. Do Condition: Internal system clock time not submerge the charger in water. Do not incorrect. splash or pour water onto the charger’s control panel or into intake/outlet vents.
• Plate Heater Products DURATION • Base Heater Products Dinex provides a one year warranty for the • Drying and Storage Rack Products Warranted Products. The warranty period • Starter Station Products begins on the date the Warranted Products...
Page 10
STATUTORY. EXCEPT AS PROVIDED HEREIN, installation, repair or alteration not performed NO EXPRESS OR IMPLIED WARRANTIES, by Dinex; (iv) the use of the Warranted Product INCLUDING BUT NOT LIMITED TO IMPLIED in combination with any software, tools, WARRANTIES OF MERCHANTABILITY,...
Page 11
Product Specifications) that results, in whole manner or environment, or for any purpose, or in part, from any improper storage or handling, for which Dinex did not design or license it, or failure to maintain the Warranted Products in the inconsistent with Dinex’s recommendations or...
Need help?
Do you have a question about the DuraTherm 2011208 and is the answer not in the manual?
Questions and answers