SUSPENZ 31-0636 Quick Start Manual

3-Boat Frame
Tools Needed: ¹/₂"
Wrench and #5 Allen Wrench (included)
A cold beverage of your choice
Assembly
Step 1: Leveling Feet Attachment
Bases Hardware Bag F
Parts Needed: 2 U- ,
Anchor
The is used when anchoring
These may be omitted when
environment.
Anchors
• With , remove first
Leveling Foot,
place
Hex Nut
screw back on. Screw into
Anchors
Without
•
into welded nut in each
Repeat for second tower.
Step 2: Base Post Attachment
Base Posts
Parts Needed: 2
Base Post
Place over
•
(Front). Note: The "Front" labels are removable.
Carriage Bolts through
Insert two
•
Lock Nuts
and from underside of
Carriage Bolts
• Insert two
Washer
with and
Once all hardware is attached fully tighten vertical bolts before fully tighten-
•
ing horizontal bolts.
For Technical assistance or Replacement parts: call 866.787.7369
Rev. 10/18
Suspenz®, Inc.
8725 Roswell Road #0-220
Atlanta GA 30350
Base
to floor, ground or dock.
Base
is on a stable level surface/
Hex Nut
from
Anchor
on foot and then
Base.
Leveling Feet
, screw four
Base
.
Hardware Bag A
,
Base
with square holes (Front) facing inside of
vertical holes on top and close with
Base .
Tighten loosely by hand.
through horizontal holes on inside of
Lock Nuts
from outside of
Base
Base
and close
Base .
Tighten loosely by hand.
Model # 31-0636
Model # 32-0603
PARTS LIST*
QTY Parts
2 U-Base
2 24" Base Post
4 28" Post
Bag A - Base Post to Base
8 5/16" x 2 3/4" Carriage Bolt
8 5/16" Washer
8 5/16" Lock Nut
Bag C - Post to Post
8 5/16" x 1" Hex Bolt
8 5/16" Thick Washer
8 5/16" Lock Washer
Bag E - Arm Mount
12 5/16" x 3 1/2" Allen Head Bolt
24 5/16" Washer
12 5/16" Lock Nut
Bag F - Leveling Feet
8 Leveling Feet
16 Hex Nut
8 Anchors
Wrenches
1 1/2" Wrench
1 #5 Allen Wrench
*Hardware for Marine Grade 3-Boat
Frame (32-0603) will be stainless steel.
Scan* to see
Video Instructions
for Assembly & Use
Visit Suspenz.com
"Video & Manual" page
*QR code reader app required
Washer
Customer Service:770-518-0045
Fax: 770-518-8507
Website: www.suspenz.com
or