Adjustment - Hitachi L42S504 Service Manual

Adjustment

1. ADC Adjustment
Ⅰ. In the TV mode adjust volume to zero, press menu key and then press number key 1
achieve the factory mode. Select the item of White Balance and press right key to enter it.
Change TV, press the item "Current Source" to Component mode and change signal to 1080i mode, press the item
"Auto Color"; Change TV, press the item "Current Source" to PC mode and change signal to PC TIMING
137(1024X768) Pattern 147 (16 Grays), press the item "Auto Color".
2. White Balance, Luminance Adjustment
Approximately 30 minutes should be allowed for warm up before proceeding white balance adjustment.
Before started adjust white balance, please set the Ca210 Channel to 05 Channel and set it's mode to xyLv mode.
Color Temp.
HDMI Mode
Note: The tolerance of the Cold color coordinates should be less than ± 10; The tolerance of the Normal
color coordinates should be less than ± 20; The tolerance of the Warm color coordinates should be less than
± 20;
How to setting the Ca210 channel, you can reference to Ca210 user guide or simple use the "Memory CH" up or
L42S504
Cold
x 272
y 278
Y
7
Normal
285
293
Panel Max Luminance
9 9 9. It will
Warm
313
329