Recording/Playback; Recording - Sony NEX-FS100E Operating Manual

Recording/Playback

Recording

Recording lamps
Your camcorder records movies on a memory card and/or a flash memory unit. Do the
following steps to record movies.
• This camcorder can record movies in either high definition image quality (HD) or standard definition
image quality (SD). The factory setting is high definition image quality (HD) ([
b Notes
• When the access lamp is lit or flashing in red, your camcorder is writing data on recording media. Do not
shake or knock your camcorder, or remove the battery pack or the AC Adaptor/Charger.
• See page 99 on the recording time of movies.
• Your camcorder can record a movie for about 13 hours continuously.
• If a movie file exceeds 2 GB during recording, the camcorder divides the file and create a new file
automatically.
• The menu settings, the PICTURE PROFILE settings, and the settings made by the AUTO/MANUAL
switch are stored in your camcorder when you slide the POWER switch to OFF. The access lamp lights up
while the settings are being stored. If you remove the battery pack or the AC Adaptor/Charger before
turning off the power, the settings may return to the default settings.
1
Slide the POWER switch to ON while pressing the green button.
Press and hold the green
button.
26
START/STOP button
START/STOP button
POWER switch
/ SET], p. 28).