When Using A Macintosh - Sony Handycam HDR-TG5E Operating Manual

Standard installation is required. Operation is
1
*
not assured if the OS has been upgraded or in a
multi-boot environment.
64-bit editions and Starter (Edition) are not
2
*
supported.
Starter (Edition) is not supported.
3
*

When using a Macintosh

The supplied software "PMB" is not
supported by Macintosh computers.
To process photos using a Macintosh
computer connected to your camcorder,
see the following website.
http://guide.d-imaging.sony.co.jp/mac/
ms/us/
Step 2 Installing the supplied
software "PMB"
Install "PMB" before connecting your
camcorder to a computer.
If a version of "PMB" supplied with another

device has already been installed on the
computer, check the version. (The version
number is displayed by clicking [Help] - [About
PMB].) Compare the version number of the
supplied CD-ROM with that of the previously
installed "PMB, " check to ensure that the
versions have been installed in order, from the
lower to the higher. If the version number of
the previously installed "PMB" is higher than
that of the "PMB" of your camcorder, uninstall
"PMB" from the computer and then re-install
it in order, from lower to higher. If you install a
higher version of "PMB" first, some functions
may not work correctly.
See page 51 on the "Handycam" Handbook.


Confirm that your camcorder is
not connected to the computer.

Turn on the computer.
Log on as an Administrator for

installation.
Close all applications running on the

computer before installing the software.

Place the supplied CD-ROM in
the disc drive of your computer.
The installation screen appears.
If the screen does not appear, click

[Start]  [Computer] (in Windows
XP, [My Computer]), then double-click
[SONYPICTUTIL (E:)] (CD-ROM) * .
Drive names (such as (E:)) may vary
*
depending on the computer.

Click [Install].

Select the language for the
application to be installed, then
click [Next].

Connect the AC Adaptor to the
"Handycam" Station Cradle and
the wall outlet (wall socket).
If you do not use the "Handycam" Station

Cradle, connect the AC Adaptor and
Dedicated USB Terminal Adaptor to the
camcorder (p. 11, 61), then proceed to
step 8.
25