Abbott FreeStyle Libre 2 Get Started page 7

03
Preparing the Sensor
Peel lid
from the sensor pack and
Line up marks
applicator.
Press down firmly on the sensor applicator until it comes to
a stop. Lift the sensor applicator
sensor applicator is now ready to apply the sensor.
04
Applying the Sensor
Place the sensor applicator over the application site,
and hold for a few seconds.
from your body.
sensor down and running your finger along the sensor adhesive.
Quick Tip
Make sure to rotate the site to allow skin to fully heal.
Switching arms each time can help.
Get support and information at FreeStyleLibre.us Get support and information at FreeStyleLibre.us
on the sensor applicator and pack.
Gently pull
Make sure the sensor is secure
unscrew cap
out of the sensor pack. The
CAUTION:
will now contain a needle.
Do not touch inside sensor
applicator or place back
inside sensor pack.
NOTE:
sensor applicator codes
must match or glucose
readings may be inaccurate.
the sensor applicator away
from the sensor
Sensor applicator
Sensor pack and
press firmly,
by pressing the
Pg 7 of 32