Technical Specifications; Aquaclean Water Filter - Philips 1200 Series User Manual

Fully automatic espresso machine
Hide thumbs Also See for 1200 Series:
Table of Contents

Advertisement

Available languages

Available languages

Problem
I cannot activate the

AquaClean water filter

and the machine asks for
descaling.
The new water filter does
not fit.
The machine is making a
loud noise.

Technical specifications

The manufacturer reserves the right to improve the technical specifications of the product. All the preset
quantities are approximate.
Description
Size (w x h x d)
Weight
Power cord length
Cause
The water tank is not fully
inserted and air is drawn into the
machine.
The brew group is dirty/clogged.
The machine is not placed on a
horizontal surface.
The water tank is not fully
inserted and air is drawn into the
machine.
The filter has not been installed or
replaced in time after the
AquaClean water filter light
started to flash. This means your
machine is not completely
limescale free.
You are trying to install another
filter than the AquaClean water
filter.
The rubber ring on the AquaClean
water filter is not in place.
It is normal that your machine
makes noise during use.
The AquaClean water filter was
not prepared properly and air is
now drawn into the machine.
The water tank is not fully
inserted and air is drawn into the
machine.
Solution
Make sure the water tank is in the correct
position: remove it and insert it again
pushing it as far as possible.
Rinse the brew group.
Place the machine on a horizontal surface
so that the drip tray does not overflow
and the 'drip tray full' indicator works
properly.
Make sure the water tank is in the correct
position: remove it and insert it again
pushing it as far as possible.
Descale your machine first and then install
the AquaClean water filter.
Only the AquaClean water filter fits into
the machine.
Place back the rubber ring on the
AquaClean water filter.
If the machine starts to make a different
kind of noise, clean the brew group and
lubricate it (see 'Lubricating the brew
group').
Remove the AquaClean water filter from
the water tank and properly prepare it for
use before you place it back. See chapter
'AquaClean water filter' for step-by-step
instructions.
Make sure the water tank is in the correct
position: remove it and insert it again
pushing it as far as possible.
Value
246 x 372 x 433 mm
7 - 7.5 kg
1000 mm
English
23

Advertisement

Table of Contents
loading

Table of Contents