Advertisement
8. Once your dishwasher is connected
to the selected network, you need to
connect to the same network on your
smart device. If your smart device does
not get connected automatically, go to its
settings and connect it to the network to
which your dishwasher is connected.
9. Return to the HomeWhiz application and
give a name to your dishwasher. This is
the last step. You can see your product
on the "Products" page.
10. Once the setup of the dishwasher has
been performed successfully, the product
will show the main screen automatically
and return to the use mode.
11. If the setup has failed, or if it could not be
completed within 5 minutes in the setup
mode, the HomeWhiz icon will go off and
the product will switch to the off mode. To
perform setup again, please repeat the
steps starting from step 1.
Using the dishwasher on more than
one device
You can use your dishwasher on more than
one smart device. Install the HomeWhiz
application on the other smart device to use
this feature. You need to log in with your
account upon launching the application.
If the account you have logged on
is the one to which you have added
appliance(s) before, you can start using
your dishwasher directly after logging in.
Follow the steps below to use an
already setup dishwasher through a
new account.
1. Create a new account and use this
account to log into the HomeWhiz
application. Make sure that your smart
device and dishwasher are connected to
the same network.
2. Tap "Add/Remove Appliance" on
the Products page. You can see the
appliance and the user it belongs
to under "Other Appliances" tab.
3. Tap (+) next to the dishwasher you
want to add and give a name to
the appliance.
4. Your request to add the appliance
will be sent to its owner via e-mail.
You can start to use the appliance
jointly once the owner confirms
your request.
Your smart device and dishwasher
do not need to be connected to
the same network once the setup
processes are complete. You can
use your appliance as long as your
smart device is connected to the
internet.
You can tap "Add/Remove
Appliance" under the "Appliances"
section to see the appliances
paired with your account. You can
perform the user pairing processes
of these appliances from this page.
HomeWhiz on/off
Press the remote control key to enable
the function.
The display when HomeWhiz is
enabled.
If you press the remote control key
while the function is enabled, the
Home Whiz function will be disabled,
and the product indicator will return to
the delay time/programme time display.
In the off position, the HomeWhiz key
LED will go off.While your machine is
on, press the "Menu" key for 1 second
to enter the settings menu. Follow
Advertisement
