Advertisement
HOMEWHIZ FUNCTION
Read "Safety Instructions" section first!
You can check your dishwasher and learn
about its status via your smart device with
the HomeWhiz function.
HomeWhiz only runs on a frequency
band of 2.4GHz.
You can use your machine via your
smart device while the function is
selected. You can monitor your machine
through the application when the function
is not selected.
You can check the indicator on the
product to see if the function is enabled
or not.
If the function is disabled, the HomeWhiz
indicator will be off or continuously flash
at short intervals. For example, when the
wireless connection setting is off or the door
of the machine is open.
The function will be disabled when
the door of the dis hwasher is open or
when operations regarding On/Off are
performed on the machine. It can be
enabled again with the remote control
key
.
The display when HomeWhiz is enabled.
HomeWhiz Setup and User
Account Settings
Install the HomeWhiz application from the
application store of your smart device to use
the WLAN function of your machine. Make
sure that your smart device is connected to
the internet to use the application.
If you are using the application for the first
time, complete the registration process with
your e-mail address on the application.
Once you've completed the registration
process, you can use all HomeWhiz
supported appliances in your house
through this account.
You can tap "Add/Remove Appliance"
under the "Appliances" section to see
the appliances paired with your account.
You can perform the user pairing
processes of these appliances from this
page.
Initial setup
1
Tap "Add/Remove Appliance" section
on the HomeWhiz application.
2
Tap "Tap here to setup a new
appliance".
3. When the machine is off, press the
on/off key and the remote control key
simultaneously to enter the settings
menu. Press the setting key to set
the product to "wireless connection
setup".
4. Then, in the settings section of your
smart device, connect to "HomeWhiz
xxx-xxxx" network under the wireless
connection settings. Password of
the network can be seen on the
HomeWhiz application.
5. Connect your smart device to the
HomeWhiz network and return to
the HomeWhiz application. On
the application, you can see the
dishwasher you are adding. Tap Next
to proceed to the next step.
6. Select the network to which you want
to connect your dishwasher and enter
the password.
7. While the dishwasher is connecting
to the selected network, you will see
the HomeWhiz icon (
Once the connection has been
established, the said icon will become
on permanently.
) flashing.
Advertisement
