Table of Contents
Advertisement
MAINTENANCE
WARNING
Use
only
original
replacement
parts,
attachments. Failure to do so can cause
possible injury, poor performance, and may
void your warranty.
WARNING
Servicing
requires
knowledge, and should be performed
only by a qualified service technician. For
service we suggest you bring the product to
your nearest authorised service centre for
repair. When servicing, use only identical
replacement parts.
NOTE: The guard does not need to be
removed when doing routine maintenance
and adjustment.
■
Switch off, disconnect the product from the
power supply or remove the battery pack
(if applicable), and make sure all moving
parts have come to a complete stop before
conducting any maintenance or cleaning
work.
■
You may make adjustments and repairs
described in this manual. For other repairs,
contact the authorised service centre.
■
After each use, clean the product with a
soft, dry cloth.
■
Check all nuts, bolts, and screws at frequent
intervals for proper tightness to ensure the
product is in safe working condition. Any
part that is damaged should be properly
repaired or replaced by an authorized
service centre.
RESIDUAL RISKS
Even when the product is used as prescribed,
it is still impossible to completely eliminate
certain residual risk factors. The following
hazards may arise in use and the operator
should pay special attention to avoid the
following:
■
Injury caused by vibration
Always use the right tool for the job. Use
–
designated handles and restrict working
time and exposure.
manufacturer's
accessories,
and
extreme
care
and
■
Hearing injury caused by exposure to noise
Wear hearing protection and limit
–
exposure.
■
Injury from flying objects from the blow tube
airflow
Wear adequate eye protection at all
–
times.
RISK REDUCTION
It
has
been
reported
from handheld tools may contribute to a
condition called Raynaud's Syndrome in
certain individuals. Symptoms may include
tingling, numbness, and blanching of the
fingers, usually apparent upon exposure to
cold. Hereditary factors, exposure to cold
and dampness, diet, smoking, and work
practices are all thought to contribute to the
development of these symptoms. There are
measures that can be taken by the operator to
possibly reduce the effects of vibration:
■
Keep your body warm in cold weather.
When operating the product, wear gloves
to keep the hands and wrists warm. It is
reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
■
After each period of operation, exercise to
increase blood circulation.
■
Take frequent work breaks. Limit the
amount of exposure per day.
If you experience any of the symptoms of this
condition, immediately discontinue use and
see your doctor.
WARNING
Injuries may be caused, or aggravated, by
prolonged use of the tool. When using any
tool for prolonged periods, ensure you take
regular breaks.
SYMBOLS ON THE PRODUCT
Safety alert
Read and understand all instructions
before operating the product, follow all
warnings and safety instructions.
that
vibrations
5
Advertisement
Table of Contents
