Samsung VR30T85 Series User Manual page 15

Safety information
• Do not look at the transmitting part (a
laser) of the revolving LiDAR sensor
horizontally.
• Be careful not to insert a tool such as a
chopstick into the revolving LiDAR sensor.
Otherwise, the LiDAR sensor may work
abnormally or malfunction.
• Before cleaning, remove objects which are
less than 9 cm height and are lightly on the
floor as the Jet Bot can push along them,
or the objects can be caught in the Jet
Bot's Spin Brush or Driving Wheels. (Fixed
objects can be detected by the Jet Bot
when its bumper is pressed and will avoid
them.)
• If oil such as cooking oil is on the floor, the
Jet Bot may become stationary because the
floor is slippery. Remove the oil first before
cleaning with the Jet Bot.
14 English
VR8500_DJ68-00858E-00_EN+TH+VI.indb 14 VR8500_DJ68-00858E-00_EN+TH+VI.indb 14 2021-04-06 2021-04-06 5:49:59 5:49:59