Table of Contents
Advertisement
All manuals and user guides at all-guides.com
– Even though the AC power cord is
removed from and reconnected to the
wall socket, the demonstration will
remain off until it is switched on again.
To start the demonstration mode
• Press and hold Ç (on the system only)
for 5 seconds when the system is in
standby mode.
™ The demonstration will begin.
Easy Set
EASY SET allows you to store all available
radio stations automatically.
• Press and hold STANDBY ON (on the
system only) for 5 seconds ; when the
system is in standby or demonstration
mode.
™ "EASY SET" will be displayed,
and followed by "TUNER" and then
"AUTO".
™ EASY SET will start searching for all
radio on FM band and then followed
by radio stations on MW band.
™ All available radio stations with
sufficient signal strength will be
stored. Up to 40 presets may be
stored.
Untitled-2
13
Notes:
Selecting the Source
– EASY SET will start with the FM band, if
• Press the respective source selection
there are still presets available, the
button: CD, TUNER, TAPE or AUX.
system will continue to store the MW
™ The display indicates the selected
band.
– When EASY SET is used, all previously
stored radio stations will be replaced.
Note:
– The last preset radio station will appear
– For an external source, make sure you
on the display when EASY SET is
have connected the audio left and right
completed.
OUT terminals of the external
equipment (TV, VCR, Laser Disc player,
DVD player or CD Recorder) to the AUX/
Switching the system ON
CDR IN terminals.
• Press CD, TUNER, TAPE or AUX.
You can also switch on the system by
Selecting the Equalizer
pressing any one of the CD DIRECT PLAY
Display
buttons.
You can select the desired equalizer display
for the system. You must not press the DSC
Switching the system to
button on the system before using the JOG
standby mode
control.
• Press STANDBY ON or B on the
• Adjust the JOG control to select the
remote control.
desired Equalizer Display, NORMAL,
™ The system will switch to standby
TOP DOWN, or NITE MODE.
mode.
™ The selected display will be shown.
™ About five seconds later, the system
NORMAL Display
will go into an energy saving mode if
the demonstration mode has been
disabled.
OPERATING THE SYSTEM
TOP DOWN Display
PROGRAM
REPEAT
NEWS
T.A.
AM
source.
NITE MODE Display
PROGRAM
REPEAT
NEWS
T.A.
AM
Note:
– In NITE MODE, all lights will be
switched off and the display brightness
will be dimmed.
PROGRAM
STEREO
BACK
REPEAT
TIMER
REC
FRONT
HSD
NEWS
T.A.
AM
MW
FM
LW
60Hz
250Hz
500Hz
2KHz
4KHz
8KHz
1KHz
6/8/01, 10:13 AM
STEREO
BACK
TIMER
REC
FRONT
HSD
MW
FM
LW
60Hz
250Hz
4KHz
8KHz
500Hz
1KHz
2KHz
STEREO
TIMER
REC
BACK
MW
FM
LW
FRONT
HSD
60Hz
250Hz
500Hz
1KHz
2KHz
4KHz
8KHz
13
3139 116 19782
Advertisement
Table of Contents
