Setting The Loudness; Children`s Safety Device - Siemens Triano User Manual

Setting the loudness

TRIANO SP hearing instru-
ments are fully automatic.
It is therefore not necessary
for you to change the loud-
ness manually.
However, if you still wish
to do so, TRIANO SP offers
you a volume control.
Your hearing instrument specialist can program the possible
adjustment range for you. If you do not want to use the
volume control, then your hearing instrument specialist can
also switch this off. Turning the volume control then does not
change the adjustment of your TRIANO SP hearing instrument.
Children's safety device
Your instruments are
equipped with a battery
compartment with lock or a
"children's safety device" . This
is intended to prevent the
unintentional removal of
batteries from their com-
partment, such as by small
children.
To lock the children's safety
device open the battery
compartment up to the first stop. Push the slide in the battery
compartment to the right with a suitable tool.
To unlock the battery compartment again, open the battery
compartment up to the first stop. Push the slide in the battery
compartment to the left with a suitable tool.
If you feel you cannot do this yourself, your hearing instrument
specialist will be pleased to help you.
30
All manuals and user guides at all-guides.com
louder
2 turn
quieter
locked
unlocked
Audio input
Your hearing instruments are equipped with an audio in
This enables the connection between hearing instrume
and accessories. It helps you to understand better in
certain hearing situations. Please use the audio shoe w
is exclusivly for TRIANO SP . It is identifiable by a printed „
which can be seen when looking from the top into the
audio shoe.
SP
Safety instructions for hearing instruments with au
input
The audio input may be connected to line-operated
equipment only if this fulfils at least the safety
requirements of IEC 65 / DIN VDE 0860.
Fitting an audio shoe
Open the battery compartm
up to the first stop, open th
flap under the 1-T-2 switch, h
the audio shoe in from the f
and press it to the rear into
detent on the inner curved
piece.
Switching off instrument w
audio shoe
Press the audio shoe to the r
up to the first stop.
Removing the audio shoe
Press the audio shoe to the
front, unhook the audio sho
and close the flap again.