Philio PSE04-A Manual

Philio PSE04-A Manual

Multiple sound siren

Advertisement

Quick Links

Multiple Sound Siren PSE04 A/B
Built-in high accuracy Temperature sensor
The PSE04 is a wireless siren, based on Z-Wave
TM
Z-Wave Plus
product, it support the security, OTA... Those newest
TM
features of the Z-Wave
communication protocol designed for home automation, specifically to
remotely control applications in residential and light commercial
environments. The technology uses a low-power RF radio embedded or
retrofitted into home electronics devices and systems, such as lighting,
home access control, entertainment systems and household appliances.
This product can be included and operated in any Z-Wave
TM
technology. It is the
TM
technology. Z-Wave
is a wireless
with other Z-Wave
other applications. All non-battery operated nodes within the network
will act as repeaters regardless of vendor to increase reliability of the
network.
The device adopt the Z-Wave
network system is all made by Z-Wave
network system will have the advantages as below.
Concurrent multi-channel support reduces external interference.
Better RF range, improve about 10 meters in indoor.
Support 100 Kbps transmit speed, speed up communication.
Specification
Rating
RF distance
RF Frequency
RF Maximum Power
Dimension
Weight
IP classification, Location
Operation temperature
Humidity
FCC ID
Max. sound duration time
Multi sound
Temperature detector range
TM
network
Specifications are subject to change and improvement without notice.
1
TM
certified devices from other manufacturers and/or
TM
700 series chip, when your Z-Wave
TM
700 series devices. The
6VDC (AA Battery *4), Max.300mA
Min. 40M indoor,
100M outdoor line of sight,
868.40 MHz, 869.85 MHz(EU)
908.40 MHz, 916.00 MHz(US)
920.9MHz, 921.7MHz, 923.1MHz
(TW/KR/Thai/SG)
+10dBm (Peak), -10dBm (Average)
170mm(L) X 58mm (W) X 30mm(H)
205g
IPx4; Outdoor use
-20 to 54° C
85%RH max
RHHPSE04
110dB @30cm
6 Different tunes, Fire
Alarm/Ambulance/Police/Alarm/Door
chime/beep
-20 to 54° C
TM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PSE04-A and is the answer not in the manual?

Questions and answers

Summary of Contents for Philio PSE04-A

  • Page 1 Multiple Sound Siren PSE04 A/B with other Z-Wave certified devices from other manufacturers and/or other applications. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network. The device adopt the Z-Wave 700 series chip, when your Z-Wave network system is all made by Z-Wave 700 series devices.
  • Page 2: Troubleshooting

    Z-Wave™ Wave™ network. then include again. network For Instruction to http:// www.philio-tech.com CAUTION – replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types); – disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;...
  • Page 3: Battery Installation

    Battery Installation When the device report the low battery message. The user should replace the battery to new one. The battery type is AA, 1.5V Please loosen the screw on the back cover to release the front cover...
  • Page 4 Product has a DSK string , you can key in first five Adding to Z-Wave Network digit to increment SmartStart process,or you can scan QR code. There is one tamper key on the device. The tamper key can add, remove, reset from Z-Wave network.
  • Page 5: Led Light Indication

    * Siren State Report: LED Light Indication When the siren start playing or stop the alarm sounds, the device will The LED light indicates the different modes of the PSE04 unsolicited to send the “Notification Report” to the nodes in the group State Type LED Indication Without Node ID Under normal operation, when the PSE04 has not...
  • Page 6: Over The Air (Ota) Firmware Update

    change the tick interval, the default value is 30, if setting to 1, that *Play Sound: means the minimum auto report interval will be one minute. And please Using the BASIC_SET or Sound_Switch_Tone_Play_Set to play the notice if setting this value to zero, that means disable all of the timing siren, BASIC_SET or Sound_Switch_Tone_Play_Set with Value 0xFF, the report except the low battery detection.
  • Page 7: Z-Wave Configuration Settings

    During the OTA process, please DO NOT remove the power, Bit6: Reserve. otherwise, the firmware will be broken, and the device will be Bit7: Reserve. nonfunctional. Auto Report Z-Wave Configuration Settings Temperature The interval time for auto report 0x0C 0~255 Time the temperature.
  • Page 8: Z-Wave Supported Command Class

    They can take this product for environmentally safe recycling. Basic Highest granted Security Class Notification Highest granted Security Class Philio Technology Corporation Sound Switch Highest granted Security Class 8F., No.653-2, Zhongzheng Rd., Xinzhuang Dist., New Taipei City 24257, Taiwan(R.O.C) Battery Highest granted Security Class w ww.philio-tech.com...
  • Page 9: Fcc Interference Statement

    FCC Interference Statement 警 警 警 警 語 語 語 語 : : : : This equipment has been tested and found to comply with the limits 「取得審驗證明之低功率射頻器材,非經核准,公司、商號或使用者均不得擅自變 for a Class B digital device, pursuant to Part 15 of the FCC Rules. 更頻率、加大功率或變更原設計之特性及功能。...

This manual is also suitable for:

Pse04-b

Table of Contents