Advertisement

Quick Links

Extreme Home Arcades
3041 Michigan Avenue
Stevens Point, WI 54481
Customers Receiving New KeyWiz MAX Input Boards
You have a custom "shift" or "shazaam" button on your panel, it is offset in
location from your Player 1's Coin/START button to help differentiate it.
1. Shift + 2 Player START = EXIT (Escape)
nd
2. Shift + 2
Player Joystick UP = Windows Key Trick
(brings up Windows START BAR at the bottom of the screen)
3. Shift + Player 1's Joystick UP = Full Screen Switch
(all MAME "Arcade Classic Games")
4. Shift + Player 2's Button 2 + RIGHT on Player 1's Joystick = ALT+TAB Trick (to switch
between active windows for navigation/control)
5. Shift + Player 1's Joystick RIGHT = Menu
(all MAME "Arcade Classic Games")
6. Shift + Player 1's Joystick DOWN = Pause
(all MAME "Arcade Classic Games")
7. Shift + Player 1's Joystick LEFT = ENTER
(like the ENTER Key on a PC Keyboard
(your machine included)
Shift Functions:
Date: 07/14/2021

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EHA and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Extreme Home Arcades EHA

  • Page 1 Extreme Home Arcades Date: 07/14/2021 3041 Michigan Avenue Stevens Point, WI 54481 Customers Receiving New KeyWiz MAX Input Boards (your machine included) You have a custom “shift” or “shazaam” button on your panel, it is offset in location from your Player 1’s Coin/START button to help differentiate it.
  • Page 2 EBSITE EXTREMEHOMEARCADES EMAIL INFO DREAMHOMEARCADES PERATION ANUAL Last Updated: 10/15/2021 Extreme Home Arcades – Operation Manual - 1 | Page...
  • Page 3 Player 1’s FIRST Button (upper left closest to Joystick). This also works for Players 2, 3 and 4 – just Push and HOLD their respective START button and simultaneously press their FIRST button (upper left closest to their respective Joysticks)]. Extreme Home Arcades – Operation Manual - 2 | Page...
  • Page 4 Player 1’s START Button. This will turn the machine off. You can hold the power button (what you used to turn the machine on with) to turn the machine off. Extreme Home Arcades – Operation Manual - 3 | Page...
  • Page 5: Table Of Contents

    Dance Dance Revolution Dance Pad Controller j. Spinner k. HyperMarquee Specific Emulators XII. Common Errors and Problems XIII. Software Updates i. Install Instructions XIV. Appendix a. Appendix 1- Basic HyperSpin Commands Page Extreme Home Arcades – Operation Manual - 4 | Page...
  • Page 6: Welcome/Thank You

    At Extreme Home Arcades, we are here to support you. If we can do anything to help you with your machine, please just contact us and let us know. Another way we support our machines is to offer you free lifetime software updates.
  • Page 7: Receiving And Unpacking Your Arcade Machine

    ECEIVING NPACKING RCADE ACHINE Your Extreme Home Arcades machine will be shipped to you via a freight carrier (see photo). BEFORE signing off on your shipment with the freight carrier, please thoroughly inspect your machine for damage. The shipping process can be hard on the machines, so please take the time to inspect the shipment carefully.
  • Page 8 RCADE ACHINE Once you have received your Extreme Home Arcades machine from the freight carrier, the next step is to get your machine safely inside your house, apartment, residence or in some cases business. Some of the machines are quite large and heavy (Megacade, Classic, Stealth, Pedestal, etc.) Please do not try and move these machines by yourself.
  • Page 9 BEGINNING TO REMOVE THE JOYSTICK/CONTROL PANEL, HAVE ANOTHER PERSON OR 2 HOLD THE JOYSTICK/CONTROL PANEL. THIS CANNOT BE OVERSTATED. THE JOYSTICK/CONTROL PANEL IS FRONT HEAVY AND CAN FALL OFF THE MACHINE IF SOMEONE IS NOT HOLDING IT UP. Extreme Home Arcades – Operation Manual - 8 | Page...
  • Page 10 - see the blue arrows on the photo. Note: DO NOT remove the smaller screws along the perimeter/outside edge of the joystick/control panel (these hold the protective plexiglass in place that cover your joystick/control panel top – see the yellow arrow on the next photo). Extreme Home Arcades – Operation Manual - 9 | Page...
  • Page 11 YOUR PEDESTAL, UNPLUG THE 5 QUICK DISCONNECT CABLES BELOW – SEE PHOTO. THESE ARE QUICK RELEASE CABLES AND WILL COME APART EASILY). Take a photo to make sure you put these back correctly when the Pedestal is in its final resting place. Extreme Home Arcades – Operation Manual - 10 | Page...
  • Page 12 8. With help from 2-3 friends remove the joystick/control panel from your machine (or rotate it 90 degrees for a pedestal if you did not unplug the wires). 9. Move Your Machine into its New Location Extreme Home Arcades – Operation Manual - 11 | Page...
  • Page 13 12. Once your machine is in place, you are ready to plug it in and turn it on. Please see the Quick Reference Guide earlier in this manual for assistance. Extreme Home Arcades – Operation Manual - 12 | Page...
  • Page 14: Introduction And Overview To Extreme Home Arcade Machines

    RCADES ACHINES Extreme Home Arcades offers many types of arcade machine builds and cabinets. They include the Megacade, Classic, Stealth, Pedestal, Game Box, TableTop and Cocktail style machines. While the builds and cabinets are different, they all offer many, if not all, of the same arcade games and the same basic front-end and back-end software that runs the machines.
  • Page 15 Most of the machines also have a large subwoofer in the unit. The Main Volume Control unit has a dial to increase and decrease the sub-woofer. Extreme Home Arcades – Operation Manual - 14 | Page...
  • Page 16 Tempest and a Flight Stick which is used for games like After Burner and some of the original Star Wars games. The photo below shows the standard button layout for Extreme Home Arcades machines. The photo below shows Player 1’s control and buttons. Player 2, 3, and 4’s are in the same layout. The Player 1 START Button looks like a single stick figure.
  • Page 17 F. Facebook Group – Extreme Home Arcades Owners Unite! And The Manhattan Project There is a private group on www.facebook.com, called Extreme Home Arcades Owners Unite! This is largely a group of Extreme Home Arcades users and customers. The group freely shares information and helps its members by providing videos, tips, tricks, other resources, and how to troubleshoot and solve problems regarding their Extreme Home Arcades machines.
  • Page 18: First Checks

    Use the Player 1 or Player 2 Joystick to navigate up or down the SYSTEM Wheel in HyperSpin to ADJUST DISPLAY PROPERTIES (see Photo). Press Player 1’s START Button to Select: ADJUST DISPLAY PROPERTIES. Extreme Home Arcades – Operation Manual - 17 | Page...
  • Page 19 Set “Resolution” to 1920 x 1080 (see Photo). If the resolution is not set to 1920 x 1080 you will need to change it to this. In the “Introduction and Overview to Extreme Home Arcades Machines” section of this manual it was explained that the Trackball on your machine can be used as a mouse.
  • Page 20: Front End - Hyperspin

    Please note: Player 1 has been abbreviated to P1, Player 2 to P2 and so on. The table below shows a list of basic HyperSpin commands/controls. Additional details for most commands are contained later in this section. Extreme Home Arcades – Operation Manual - 19 | Page...
  • Page 21 DOWN on P1’s Joystick. To resume game, repeat the same command. Restart a Game (in the middle of a game) ● Push LEFT on P1’s Joystick and then Press P1’s START /OR “Shazaam” button Button Extreme Home Arcades – Operation Manual - 20 | Page...
  • Page 22 “boot-up” procedure. After about 20 seconds you will see an operating system logo and then a Windows Desktop which includes the Extreme Home Arcades contact information and logo. There is nothing to do at this point, just let the machine continue to “boot-up” and eventually the Windows desktop will disappear and a HyperSpin introduction movie will begin.
  • Page 23 Press P2’s START Button one more time. When you are asked if you want to Shutdown, point with the Joystick to Yes and press P1’s START button. The machine will then shut down. Extreme Home Arcades – Operation Manual - 22 | Page...
  • Page 24 A in this example, you press P1’s START Button. This takes you directly to all the games in the PlayStation 2 wheel that start with the letter A. Extreme Home Arcades – Operation Manual - 23 | Page...
  • Page 25 Again, when you remap a game ALWAYS select “Input (this Machine).” To select “Input (this Machine)” use the P1”s Joystick to navigate to it and then push P1’s START Button. Extreme Home Arcades – Operation Manual - 24 | Page...
  • Page 26 Press and HOLD P1’s START button/OR “Shazaam” button and press P2’s START button to go back to the previous menu. Turn Bevel Side Art On and Off Extreme Home Arcades – Operation Manual - 25 | Page...
  • Page 27 Adult Games Wheel Category – On or Off - There are adult games on the machine that may not be appropriate for children. You can turn the “Adult” wheel category off in HyperSpin so it does not display Extreme Home Arcades – Operation Manual - 26 | Page...
  • Page 28 Restart the machine by holding down the Power Button you used to start the machine until the machine turns off. Then, wait 30 seconds and push the Power Button to turn the machine back on to restart it. Extreme Home Arcades – Operation Manual - 27 | Page...
  • Page 29: Back -End Windows

    VII. INDOWS As indicated earlier, Extreme Home Arcades machines use a “back-end” system – Microsoft Windows (see photo of Windows – Desktop and Windows File Explorer), to control the many complicated computer functions that it takes to run the emulators and games. In this section we will introduce the back-end Windows interface to you in a little more detail.
  • Page 30 Point the mouse cursor with the Trackball to left side of the screen to the Pictures icon (it is above the Flying Windows Icon and above Power and Settings) – it Extreme Home Arcades – Operation Manual - 29 | Page...
  • Page 31 Each time you press right on P1’s joystick you will see the active windows running and can cycle through them. iii. Let go of the buttons when you are on the highlighted window you want to control. This is like pressing ALT+TAB in Windows. Extreme Home Arcades – Operation Manual - 30 | Page...
  • Page 32 In the example, the user is searching for games with “donkey kong” in the title. To execute the search just click on “OK.” Extreme Home Arcades – Operation Manual - 31 | Page...
  • Page 33 70 some games, across many systems are displayed. To select a game, just click on it with the left AUX Button. The game will then be loaded. Extreme Home Arcades – Operation Manual - 32 | Page...
  • Page 34: Commands

    Reverse ● Push and hold P1’s Joystick LEFT Increase Volume ● Push P1’s Joystick UP Decrease Volume ● Push P1’s Joystick DOWN Crop/Change Screen Size ● Push P1’s Button 7 Extreme Home Arcades – Operation Manual - 33 | Page...
  • Page 35 Player 1 and Player 2’s Button Layouts (STANDARD) (Note: if you ordered a different layout, yours may be different) Extreme Home Arcades – Operation Manual - 34 | Page...
  • Page 36 Favorites Menu, here you can add the selected game to the favorites list or your own liking and switch the menu to show just your selected (and saved) favorite games. Extreme Home Arcades – Operation Manual - 35 | Page...
  • Page 37: Peripherals

    Wireless Analog Controllers e. Light guns f. Flight Stick g. Steering Wheel/Pedals h. Dolphinbar Nintendo Wii Light Bar and Controllers i. Dance Dance Revolution Dance Pad Controller j. Spinner k. HyperMarquee Extreme Home Arcades – Operation Manual - 36 | Page...
  • Page 38: Common Errors And Problems

    Then Click on DEVICES and see if you see the IPAC 4 listed, does it show a driver error or any other error next to it? If it does have an error just select "REMOVE Device" and reboot your machine, Working now ? Extreme Home Arcades – Operation Manual - 37 | Page...
  • Page 39: Software Updates

    OFTWARE PDATES i. Install Instructions Extreme Home Arcades – Operation Manual - 38 | Page...
  • Page 40: Appendix 1

    APPENDIX 1 EXTREME HOME ARCADES - HYPERSPIN BASIC MENU CONTROLS/COMMANDS TABLE Item Description Go to Windows Backend System ● HOLD DOWN P1’s START Butto/OR “Shazaam” buttonn and push P2 Joystick UP. Windows Task Manager (ALT + TAB) ● HOLD DOWN P1’s 2 Button and then HOLD P1’s START Button/OR...
  • Page 41 To EXIT Nintendo games: /OR “Shazaam” button Push and hold player 1 start button and push player 2’s start button, this will bring you back to the main game menu. Extreme Home Arcades – Operation Manual - 40 | Page...
  • Page 42 Daphne is a Laser Disc Emulation System, You MUST wait till the whole game loads (about 10 seconds after selecting a Daphne Game) Then Credit the Game and Play as normal… Extreme Home Arcades – Operation Manual - 41 | Page...
  • Page 43 /OR “Shazaam” button Player 1’s First Button. To Exit Daphne Games: PUSH AND HOLD Player 1’s Start Button , Then Push Player 2’s Start /OR “Shazaam” button Button (normal Exit function) Extreme Home Arcades – Operation Manual - 42 | Page...
  • Page 44 6 = Nudge Right /OR “Shazaam” button To EXIT pinball games just push and hold player 1’s start button and push player 2’s start button (2 or 4 Player Machines). Extreme Home Arcades – Operation Manual - 43 | Page...
  • Page 45 To EXIT this game you must select “menu” button and then select “Exit” to return to game menu. Please do not change the settings under the “settings” menu or game will be unplayable Extreme Home Arcades – Operation Manual - 44 | Page...
  • Page 46 Select with your Trackball and upper LEFT trackball button: “Config” on the upper line, then select “Controls” on the drop down menu This window will then popup: Extreme Home Arcades – Operation Manual - 45 | Page...
  • Page 47 Click on Joy 1 or Joy 2 for DreamCast Controls OR Click on Joy 1 or Joy 2 under “Arcade” for NAOMI controls Default Controls are listed below: DreamCast Joy 1 Configuration Dreamcast Joy 2 Configuration NAOMI Joy 1 Configuration NAOMI Joy 2 Configuration Extreme Home Arcades – Operation Manual - 46 | Page...
  • Page 48 You can click on any function and change it but you FIRST MUST HOLD THE BUTTON OR JOYSTICK DIRECTION YOU WITH TO ASSIGN and then click on the TAB to enter the new button/joystick function. Extreme Home Arcades – Operation Manual - 47 | Page...
  • Page 49 Note: All Emulation Systems listed above for WIRELESS ANALOG CONTROLLERS WILL NOT WORK WITHOUT THESE WIRELESS ANALOG CONTROLLERS This is because your normal arcade controls do not work as “analog” devices that these newer emulation systems REQUIRE… Extreme Home Arcades – Operation Manual - 48 | Page...
  • Page 50 There is also a dedicated 4-way joystick above your player 1 controls along with 3 AUX buttons (unless otherwise ordered differently) The 4-way joystick is made to play all classic arcade games correctly. Example of 4-way Classic Games: Pac-Man Frogger Dig-Dug Donkey Kong Mario Bros. Mr. DO! Extreme Home Arcades – Operation Manual - 49 | Page...
  • Page 51 5.  Trackball = Track X Analog AND Track Y Analog (X-Axis is LEFT/RIGHT and Y-Axis is UP/Down) 6.  Spinner = Dial Analog or Paddle Analog Extreme Home Arcades – Operation Manual - 50 | Page...
  • Page 52 Sound: Adjust the sound functions here, factory set but can be altered. Video: Change aspect ratio, game artwork, resolution and other video related options here. *In Menu use PLAYER 1’S 1ST button to ENTER the next menu (select button)* Extreme Home Arcades – Operation Manual - 51 | Page...
  • Page 53 Tron Analog Joystick (flight stick) Calibrate Analog Joystick: Calibrate your Tron Analog Joystick (in shipping this calibration can be thrown off), select "Calibrate Analog Joystick" in System Utilities (directly above Arcade Classics on the Main Wheel) Extreme Home Arcades – Operation Manual - 52 | Page...
  • Page 54 DOT move all around the BOX, it's fine if the dot does not move to the full corner of the box in all directions, when you let go of this joystick it should center roughly (does NOT have to be exactly centered to be calibrated) Extreme Home Arcades – Operation Manual - 53 | Page...
  • Page 55 If your game uses the normal Player 1's Joystick (8-way joystick) make sure that your Player 1's controls look like this ONLY: P1 UP = UP P1 DOWN = DOWN P1 LEFT = LEFT P1 RIGHT = RIGHT Extreme Home Arcades – Operation Manual - 54 | Page...
  • Page 56 To adjust, bring up the In-Game Menu (Player 1's START + RIGHT on Player 1's Joystick), select "Analog Controls" and then highlight and adjust (left or right on Player 1's Joystick) the "Dial, Paddle, Axis, Track, etc" Sensitivity (NOT "SPEED") Return to Game and Play... Extreme Home Arcades – Operation Manual - 55 | Page...
  • Page 57 (enter button) again and push the other control so you can use both for the shift function. Steering Wheel and Pedals Continued… Extreme Home Arcades – Operation Manual - 56 | Page...
  • Page 58 Extreme Home Arcades – Operation Manual - 57 | Page...
  • Page 59 When finished select "EXIT" on the bottom of the screen and you can return to the game and play. PUMP IT UP has a very similar setup screen, load this game and configure just like the above instructions for Step Mania above... Extreme Home Arcades – Operation Manual - 58 | Page...
  • Page 60 The Setup Button for PUMP IT UP is Player 2’s START Button **** , this will bring up the “service” menu where you can enter your DDR Pads settings just like you did with STEP MANIA above Extreme Home Arcades – Operation Manual - 59 | Page...
  • Page 61 This will make the stick function as it should, make sure to exit the game (to save these settings) by pushing FIRST player 2 start and then Player 1 Start. Extreme Home Arcades – Operation Manual - 60 | Page...
  • Page 62 Positional Sensitivity (Change to 100) **** YOU CAN ALSO REVERSE THE DIRECTION OF ROTATION IN THIS MENU **** Do the same for Positional 2 functions for the second player’s controls Extreme Home Arcades – Operation Manual - 61 | Page...
  • Page 63 Light Bar “SYNC” button to set the controllers comunication to the Light Bar and the Wii emulation system. Your Wii Light Bar should ALWAYS BE IN MODE 4 for normal Wii Emulation. Extreme Home Arcades – Operation Manual - 62 | Page...
  • Page 64 (useful for other emulation systems interchangable with our Wireless Game Controllers used on PS1, PS2, N64, GameCube, and many Modern PC games on our machines. Extreme Home Arcades – Operation Manual - 63 | Page...
  • Page 65 5. Plug Both Light Gun’s USB connections back in to the front of your machine. BEFORE YOU CALIBRATE OR CHECK SETTINGS PLEASE CHECK THE “LIGHT GUN CALIBRATION” UTILITY IN THE UTILITIES FOLDER DIRECTLY ABOVE THE “ARCADE CLASSICS” HEADING ON THE MAIN WHEEL! Extreme Home Arcades – Operation Manual - 64 | Page...
  • Page 66 BY CLICKING ON THE “DEVICE X” ON THE BOTTOM LEFT OF THE SCREEN. YOU CAN THEN CLOSE THIS MENU **** IF YOUR FIRE AND RELOAD BUTTONS DO NOT WORK ALWAYS CHECK THIS UTILITY MENU FIRST! ***** Extreme Home Arcades – Operation Manual - 65 | Page...
  • Page 67 Calibration – This should be done while holding the Light Gun in your normal “shooting” position. If you intend to look through the gun-sights when playing you must do this when calibrating. Likewise, if you “shoot from the hip” you must do this when calibrating as well. Extreme Home Arcades – Operation Manual - 66 | Page...
  • Page 68 Light Bar Setup for your HDTV (Pedestals and GameBoxes) Extreme Home Arcades – Operation Manual - 67 | Page...
  • Page 69 BACK when you get to this lower 3 calibration point. The gun should track well (curser follows your guns aiming) IF it does not repeat the above steps. Light Gun Calibration Points on Screen (Follow the CrossHairs) Extreme Home Arcades – Operation Manual - 68 | Page...
  • Page 70 NOTE: The cursor may not move all the way to the edges of the screen, or may not track precisely with your movement yet. You still need to perform an initial calibration (See previous calibration page) Extreme Home Arcades – Operation Manual - 69 | Page...
  • Page 71 Make sure there are no other sources of IR light in the room that may throw off your guns sensors. Dimmable lights, security cameras, motion detectors, etc... Extreme Home Arcades – Operation Manual - 70 | Page...
  • Page 72 6) Press the Enter key (Player 1’s START Button) to select the Lightgun X Analog menu item. Stand Back about 4-5 feet from your Screen or Sensor Bar and move your AimTrak Light Gun steadily to the right, in a horizontal motion. Extreme Home Arcades – Operation Manual - 71 | Page...
  • Page 73 OFF THIS FUNCTION and press the upper LEFT Trackball Button, then clear again WITHOUT MOVING OFF THIS FUNCTION and WITHOUT aiming the gun at the screen just pull the trigger. Extreme Home Arcades – Operation Manual - 72 | Page...
  • Page 74 13) If you have a 2 Gun you can set it up by going into Player 2’s Controls (Input General) and following the instructions from STEP 5 through STEP 12 Extreme Home Arcades – Operation Manual - 73 | Page...
  • Page 75 1) Press the Tab key (default key) to bring up the MAME Config Menu 2) Use the Up/Down arrows (or joystick) to move the selection, and press the Enter key (default key) to select Crosshair Options. Extreme Home Arcades – Operation Manual - 74 | Page...
  • Page 76 Each player (if the game allows more than one simultaneous player) has their own crosshair setting. These settings will be saved for this game, and may be set independently for other light gun games. Extreme Home Arcades – Operation Manual - 75 | Page...
  • Page 77 When you load up this program you will be given an adjustment screen that looks like this: You will then select with your Trackball and Upper Left AUX (left mouse click) Button these 3 titles (only these 3 titles apply) Extreme Home Arcades – Operation Manual - 76 | Page...
  • Page 78 AFTER you have selected one of these titles you will click on “Settings Page 2” icon to show the 2 page. Here you only have 1 option to change: (DO NOT CHANGE ANY OTHER SETTINGS IN THIS UTILITY MENU) Extreme Home Arcades – Operation Manual - 77 | Page...
  • Page 79 BOTH House of the Dead 2 and House of the Dead 3 to the same “Gun Settings P2” Device # (either changing from Device # 1 or Device # 2 Extreme Home Arcades – Operation Manual - 78 | Page...
  • Page 80 Player 1’s Gun Buttons and AXIS Set Correctly Extreme Home Arcades – Operation Manual - 79 | Page...
  • Page 81 Player 2’s Gun Buttons and AXIS Set Correctly Extreme Home Arcades – Operation Manual - 80 | Page...
  • Page 82 6.  Screen will Flicker and then you will be prompted to keep this resolution, Click "YES" before the timer runs out 7. DONE - Close Window Pictures on Next Page... Extreme Home Arcades – Operation Manual - 81 | Page...
  • Page 83 Extreme Home Arcades – Operation Manual - 82 | Page...
  • Page 84 FIRST:  Press Player 1's 4th Button, this will bring up the next menu. SECOND:  Press Player 2's START button, after the game STARTS you can then press Player 1's START Button to have Player 1 Join. Extreme Home Arcades – Operation Manual - 83 | Page...
  • Page 85 PLAYER's LIGHT GUN at the Screen (doesn't seem to matter where) and PULL THE TRIGGER on the 2nd PLAYER's LIGHT GUN. This will start the game in 2 Player Mode Extreme Home Arcades – Operation Manual - 84 | Page...
  • Page 86 Select EXIT and return to the Game To Play, as long as you keep your Dance Pad Plugged in when you load up "Step Mania" you will not have to do this setup again. Extreme Home Arcades – Operation Manual - 85 | Page...
  • Page 87 1’s button one, for example button 3. This will now remap the player 1’s button 1 from it’s normal button 1 position and make button 3 function as button one. Extreme Home Arcades – Operation Manual - 86 | Page...
  • Page 88 Computer emulation there are limitations in the amount of buttons we can configure when a system originally used a FULL keyboard.  We've tested several games and set basic controls for many of these games... Extreme Home Arcades – Operation Manual - 87 | Page...
  • Page 89 USA) but mainly at load screens.  This is a software "bottleneck" due to the multiple processors used on these original board sets in the original machines, emulation will improve with time but we are aware of these slow downs. Extreme Home Arcades – Operation Manual - 88 | Page...
  • Page 90 9.  Deal or No Deal has been fixed thanks to your heads up on the No-CD Thing... Link to fix file is here, copy and paste into the D:\Arcade\New Secret PC Games\Deal or No Deal\ Directory overwriting the original exe file. Extreme Home Arcades – Operation Manual - 89 | Page...
  • Page 91 Trackball Button "Game Ports" on the left side and set "PORT 1" to "Keyboard Layout B" Click on "OK" to return to the game, then with you keyboard Press F1 to start a 1 Player Game. "Fire Button" is Player 1's 2nd Button. Extreme Home Arcades – Operation Manual - 90 | Page...
  • Page 92 Most games tested worked fine... Remember you can easily config all controls with this system by bringing up the In Game Menu (player 1's Start + Player 1 Joystick RIGHT) and select "Input This System" Extreme Home Arcades – Operation Manual - 91 | Page...
  • Page 93 23. Electric Baseball Now removed from our systems, redundant with other LCD games 24. Blue Estate The Game Works with Light Guns or Trackball (upper left Trackball button) 25. Jukebox requires MP3 Files to be added manually via Flash Drive Extreme Home Arcades – Operation Manual - 92 | Page...
  • Page 94 Keys on the Keyboard, ultimately we try to setup the inputs/controls for most of the popular games but because this is an emulation system we cannot fully emulate a full keyboard which is really what is required for FULL function of the C64 System. Extreme Home Arcades – Operation Manual - 93 | Page...
  • Page 95 C64,  Use "PAGE DOWN" key on your keyboard to scroll alphabetically down to "Ultimate Wizard" (DISK 1), when you have it highlighted you MUST Push F3 Key to "Load, NORMAL" and the game will load up and play great. Extreme Home Arcades – Operation Manual - 94 | Page...
  • Page 96 Left to Right, Top To Bottom: 1, 2, 3, 7 4, 5, 6, 8 This keeps things in order for buttons 1-6 for games like Street Fighter and other 6 button fighting games. Extreme Home Arcades – Operation Manual - 95 | Page...
  • Page 97 NES System: Look for "Options" then "input" then "File" on the left side. Set Save and Load Keys (buttons) PSX: Cannot be altered. Default is Quick Save F6 and Quick Load F1 keys. Extreme Home Arcades – Operation Manual - 96 | Page...
  • Page 98 PLAYER COIN BUTTON 5 (1 LCTL) 6 (2A) 7 (3RCTL) TRACKBALL BUTTON 1 = LEFT MOUSE CLICK TRACKBALL BUTTON 2 = MIDDLE MOUSE CLICK TRACKBALL BUTTON 3 = RIGHT MOUSE CLICK Extreme Home Arcades – Operation Manual - 97 | Page...
  • Page 99 BUTTON + PLAYER 1’S START BUTTON + UP ON PLAYER 1’S JOYSTICK This combination sends (~) Tilde, this can be used to CRASH or Close out a Non-Responsive RocketLauncher Program (hidden program used to load games) Extreme Home Arcades – Operation Manual - 98 | Page...
  • Page 100 CUSTOM RGB TRACKBALL LIGHT CONTROLLER Extreme Home Arcades – Operation Manual - 99 | Page...
  • Page 101 Extreme Home Arcades – Operation Manual - 100 | Page...
  • Page 102 Right click on the Composite Device and "Uninstall" it. ● ● At the the top select "Action", "Scan for New Hardware". Alternatively, if you have "lost" your USB mouse, just unplug/reconnect it. Extreme Home Arcades – Operation Manual - 101 | Page...
  • Page 103 Stealth MegaCades 4 Player Stealth MegaCade (50” Monitor): 48”W X 38”D X 72”H Weight: 265 lbs. 2 Player Stealth MegaCade (43” Monitor): 40”W X 38”D X 72”H Weight: 245 lbs. Extreme Home Arcades – Operation Manual - 102 | Page...
  • Page 104 (Plug Directly Via HDMI into ANY Size HDTV) 2 Player GameBox: 36”W X 19”D X 6”H Weight: 40 lbs. 4 Player GameBox: 48”W X 19”D X 6”H Weight: 60 lbs. Extreme Home Arcades – Operation Manual - 103 | Page...
  • Page 105 Then push the BLACK shutdown button located on the Top Left of the machine or the back of your machine (pedestal cabinets, Table Top cabinets) Extreme Home Arcades – Operation Manual - 104 | Page...
  • Page 106 1b. If nothing has a "!" by it under "Unknown Devices" your drivers should be loaded and your controllers (may require a few tries) but your controllers should sync up. 2. This is what the Device Manager screen should look like if all is "Good" Extreme Home Arcades – Operation Manual - 105 | Page...
  • Page 107 Continue to Sync Up Your controllers (Skip to Step #9) If there is an "Unknown Device" 1. Click on the Unknown Device Icon, Select the Unknown Device 2. Select "Update Driver" 3. Select "Browse My Computer for Driver Software" Extreme Home Arcades – Operation Manual - 106 | Page...
  • Page 108 4. Select "let me pick from a list of device drivers on my computer 5. Select “Microsoft Common Controller for Windows Class” Extreme Home Arcades – Operation Manual - 107 | Page...
  • Page 109 6. Select “Xbox 360 Controller For Windows Version 6.1.7600…. 7. Click “Yes” When prompted to install driver in spite of Microsoft’s Warning… 8. Success, your drivers are loaded, close all windows to return to HyperSpin Extreme Home Arcades – Operation Manual - 108 | Page...
  • Page 110 If the controller does not “Sync” you can repeat Step # 9 Again till it does, make sure the LED is flashing on the Transmitter or repress the “Sync” button on the transmitter and confirm the green light is flashing… Repeat Step # 9 for 2 Controller (or 3 or 4 controller) Extreme Home Arcades – Operation Manual - 109 | Page...
  • Page 111 - same as MOUSE Left Click on a PC) "Tools" tab is located on the bottom right of the tabs shown on this screen. LED Blinky = Set to "Disabled" Close this Window (Red X upper right corner) Reboot Your Machine Extreme Home Arcades – Operation Manual - 110 | Page...
  • Page 112 This will overwrite and refresh both the EDS and HyperMarquee Folders here. Close this Window (upper RED X icon) 3. Select "Remove Game Systems" from the System Utilities (directly above Arcade Classics on the Main Wheel) Extreme Home Arcades – Operation Manual - 111 | Page...
  • Page 113 LED Blinky = Set to "ENABLED" Close this Window (Red X upper right corner) Reboot Your Machine Done, this should fix/reset your non-functional upper marquee display Extreme Home Arcades – Operation Manual - 112 | Page...
  • Page 114 System Board and Connections: (Machines produced after 01/01/2016) Main On/Off Power Connection (see red arrow) Header: JFP1 (Plug on two pins closest to one that is missing) Extreme Home Arcades – Operation Manual - 113 | Page...
  • Page 115 System Board Before 01/01/2016 Extreme Home Arcades – Operation Manual - 114 | Page...
  • Page 116 System Board and Connections (Machines produced after 4/6/2016) Extreme Home Arcades – Operation Manual - 115 | Page...
  • Page 117 4 normal USB ports are used on the system board. 5. Plug the small two pin connector (purple wires) into the small connector that comes from your power button (turns everything on) Extreme Home Arcades – Operation Manual - 116 | Page...
  • Page 118 3. Press the Right Arrow Key on your keyboard to select "Advanced" on the top row of Icons 4. Press ENTER key to Select "LAN Configuration" Press Enter and using Arrow Keys Select "Disabled" 5. Press ESC key once to return to the prior menu. Extreme Home Arcades – Operation Manual - 117 | Page...
  • Page 119 Please check your battery, see attached image to make sure it is pushed in and tight on your system board to keep this error from coming up in the future... Extreme Home Arcades – Operation Manual - 118 | Page...
  • Page 120 Questions??? Call us anytime 7am to 4pm CST 715-212-8063 Toll Free: 1-833-652-1003 EXTREME HOME ARCADES 3041 Michigan Avenue Stevens Point, WI 54481 Extreme Home Arcades – Operation Manual - 119 | Page...
  • Page 121 Provide warranty and service repairs as directed by (Dream Home Arcades) Service Repair bulletins or other instructions. No warranty will be allowed on units delivered to the retail customer prior to the full Extreme Home Arcades – Operation Manual - 120 | Page...
  • Page 122 (Dream Home Arcades LLC) in no way warrants customers household wiring, electrical outlets or other trade accessories since these items are warranted separately by their respective manufacturer. Our obligation under this warranty shall be limited to repairing or replacing, free of charge to the Extreme Home Arcades – Operation Manual - 121 | Page...
  • Page 123 (Dream Home Arcades LLC) reserves the right to make improvements in design or changes in specifications at any time, without incurring any obligation to owners of units previously sold. No one is authorized to alter, modify or enlarge this warranty nor the exclusion, limitations and reservations. Extreme Home Arcades – Operation Manual - 122 | Page...
  • Page 124 Credit to the customer will be determined after the custom product has been returned and inspected and the terms agreed upon by Dream Home Arcades LLC and the customer have been met (resale or repair). REFUND POLICY Extreme Home Arcades – Operation Manual - 123 | Page...
  • Page 125 “Buyers Remorse”. This $500 minimum will be used to cover storage, relisting, and reselling the machine when a customer refuses to pay the final balance. Extreme Home Arcades – Operation Manual - 124 | Page...

Table of Contents