Advertisement
DISASSEMBLY/ASSEMBLY PROCEDURES
7. Binding Post Connector removal
7.1 Remove the four screws (2) that secure
the binding post connector (9) to the
speaker cabinet.
7.2 Gently pull on the binding post
connector housing until it comes free of the
cabinet.
8. Binding Post Connector replacement
8.1 Slide the binding post connector (9) into
the rear of the cabinet. Be sure it is aligned
so that the + and - markings on the binding
post connector are nearest the edge of the
cabinet.
8.2 Secure the binding post connector to
the cabinet using the four screws (2)
removed in procedure 7.1. Be sure not to
overtighten the screws, or you will crack the
binding post connector housing.
5
Advertisement
