In accordance with EMC Directive 89/336/EEC and Article 10(1) of the Directive, is in compliance with the following norm(s) or document(s): Technical regulations: EN50081-1, EN50082-1 Accredited by: Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA 29 April 2000 Bose Products B.V. Nic Merks...
Installation 1.0 Package contents 2.0 Steps for loudspeaker installation To install the Bose ® Panaray ® ™ A loudspeaker, first remove the transformer cover from the bracket. 2.1 Changing the voltage and tap setting The transformer is set at the factory for 70V, 200W operation.
Installation 2.2 Mounting the bracket Caution: Install the loudspeakers in compliance with local building and electrical codes. Use minimum size #10 (M4) pan head screws. In the U.S., this version is designed for installation using Class 2 wiring methods in accordance with Articles 640 and 725 of NFPA 70, National Electrical Code.
Page 5
Installation 2.2.2 Make an allowance for the wiring Consider how the amplifier wires will thread into the bracket. • To use the rear opening on the bracket, be sure to insert the wires first, before you mount the bracket. • To use the bottom opening, remove the plug from that opening.
Page 6
Installation 2.3 Connecting the amplifier wires 2.4 Attaching the speaker to the bracket...