Table of Contents
Advertisement
Stowage areas
300
Raise box : and press hooks A into
X
anchorage ? as far as they will go.
Turn left-hand rotating catch B clockwise
X
and right-hand rotating catch B anti-clock-
wise by 90°.
To remove: turn left-hand rotating catch
X
B anti-clockwise and right-hand rotating
catch B clockwise by 90°.
Move box : downwards and pull it out
X
from anchorages ?.
i
Store the EASY-PACK boot box on a flat
surface after removal, e.g. on a suitable
shelf.
EASY-PACK load-securing kit (CLS
Shooting Brake)
Components and storage
The EASY-PACK load-securing kit allows you
to use your luggage compartment for a variety
of purposes. The following accessory parts
are located under the luggage compartment
floor:
Telescopic rod (under the luggage com-
R
partment floor)
Bag containing the brackets and luggage
R
holder (under the luggage compartment
floor or in one of the side stowage nets in
the luggage compartment).
Inserting the brackets into the loading
rail
G
WARNING
Distribute the load on the lashing eyelets
evenly.
Otherwise, vehicle occupants could be
injured by objects being thrown around if you:
brake sharply
R
change direction suddenly
R
are involved in an accident
R
Please observe the loading guidelines.
Insert bracket : into the centre of loading
X
rail ?.
Press release button ; and push
X
bracket : into the desired position in load-
ing rail ?.
Let go of release button ;.
X
Press locking button =.
X
Bracket : is locked in loading rail ?.
If necessary, fold lashing eyelet A
X
upwards.
Luggage holder
! Only use the luggage holder to secure
loads with a maximum weight of 7 kg and
with dimensions that allow the loads to be
safely and securely retained by the luggage
holder.
Advertisement
Table of Contents
