Table of Contents
Advertisement
5
Fully extend the shoulder belt and allow it to
retract to put it in lock mode. In lock mode,
the belt cannot be extended.
6
While pushing the child restraint system into
the rear seat, allow the shoulder belt to re-
tract until the child restraint system is securely
in place.
After the shoulder belt has retracted to a point
where there is no slack in the belt, pull the belt to
check that it cannot be extended.
7
If the child restraint has a top tether strap, follow the child restraint manufactur-
er' s operation manual regarding the installation, using the top tether strap to
latch onto the top tether strap anchor.
8
After installing the child restraint system, rock it back and forth to ensure that it
is installed securely.
Booster seat
1
If installing the child restraint system to the front passenger seat is unavoidable,
refer to
P.67.
→
2
High back type: If the head restraint interferes with your child restraint system,
and the head restraint can be removed, remove the head restraint. Otherwise,
put the head restraint in the upper most position.
3
Place the child restraint system on the seat facing the front of the vehicle.
Booster type
1-4. Preparations for safe driving with children in the vehicle
1
65
Advertisement
Table of Contents
