Princess Aerofryer XXL Instruction Manual page 6

Instruction manual
Progra Temperature Time
m (°C) (minutes)
180
180
180
180
160
200
180
180
• Baking times may vary based on amount of fries, type of fries,
temperature and brand.
• When you press the power button, the airfryer will start the
corresponding program. When you have chosen the wrong program,
you can abort by pressing the power button again. The device will stop
6
Action
20 Turn over after 5 minutes.
15 Turn over after 5 minutes, check for
doneness.
25 Turn over after 10 minutes, check
for doneness.
12 Carefully shake after 4 minutes.
40
20 Shake every 6 minutes.
15
15 Turn over after 5 minutes, check for
doneness.
after 20 seconds. After this you can select another function. It is also
possible to adjust the chosen program by changing the time and
temperature.
• The time can be adjusted with the timer control button. Press the timer
control button one time to increase or decrease the frying time by one
minute using the selector dial. You can set the timer between 1 and 60
minutes.
• The temperature can be adjusted with the temperature control button.
Press the temperature control button one time to increase or decrease
the temperature by 5 degrees using the selector dial. You can set the
temperature between 80 and 200 degrees.
• It is also possible to start the device without selecting a function. Set
the time and temperature with the timer and temperature control
buttons, then press the start/stop button.
• When you pull out the pan during the frying process, the device will
shut off automatically. When you reinsert the device, the program will
resume.
• To cancel any program, press the start/stop button. The device will
shut off after 20 seconds.
PREHEAT (P) and QUICK 5 (5) functions:
PREHEAT:
If a recipe calls for a preheated oven, or, when cooking meats or proteins
that benefit from a hot initial sear, use preheat (P) function.
• Insert the empty air frying basket/drawer into the fryer. Turn the
selector dial until P illuminates.
• Press the start/stop button to select the function, the default time and
temperature will be on the display.
• Press the start/stop button again to begin preheating.
• When 5 beeps sound, the appliance is preheated.