Advertisement
(2) Lock the tapping screw bolts on the expansion screw tubes at A1 and A2, reserving 5-10mm distance of the
screw bolts external.
(3) Align the top and the left sides of the dock to the reference lines for installation and thus the hardy holes at
the back of the device will be able to hang on the tapping screw bolts at A1 and A2. Push the device to the right
and the location columns will be able to insert into the location holes on the main module and the dock can be
locked tight at the hardy holes.
Dock
Location
Location
column
hole
Align
Picture 6 Install docks
6
Main module
Advertisement
