Sony SLV-ED343SG Operating Instructions Manual page 29

Using Playback Dial on the VCR
With Playback Dial, you can
operate the following playback
options.
To
Resume play after pause
Fast-forward the tape
Rewind the tape
View the picture during
fast-forward or rewind
Play at high speed
Tip
• Adjust the picture using the PROGRAM +/– buttons on the VCR if:
- Streaks appear while playing in slow motion.
- Bands appear at the top or bottom while pausing.
- The picture shakes while pausing.
To set tracking to the centre position, press both buttons (+/–) at the same time.
Notes
• The sound is muted during these operations.
• In the LP mode, noise may appear or there may be no colour.
• If the playback mode mark does not appear on the TV screen, press DISPLAY.
• The picture may show noise when playing at high speed in reverse.
• Do not turn Playback Dial forcibly. It may damage Playback Dial.
Do this
Press H PLAY.
Quickly turn and release Playback Dial to the right
(M FF) during stop.
Quickly turn and release Playback Dial to the left
(m REW) during stop.
During fast-forward, turn and hold Playback Dial
to the right (M FF). During rewind, turn and
hold Playback Dial to the left (m REW).
• During playback, quickly turn and release
Playback Dial to the right (M FF) or left (m
REW). The tape continues to play at high speed.
• During playback, turn and hold Playback Dial to
the right (M FF) or left (m REW). When
you release Playback Dial, normal playback
resumes.
Playback Dial
29