Table of Contents
Advertisement
Troubleshooting (continued)
Symptom
A tape cannot be inserted.
The remote commander does
not function.
The tracking meter does not
appear on the screen.
The VCR needs to be cleaned.
38
Additional Information
Remedy
• Check that a tape isn't already in the tape
compartment.
• Make sure you are pointing the remote commander at
the remote sensor on the VCR.
• Replace all the batteries in the remote commander with
new ones if they are weak.
• Make sure the [TV] / [VIDEO] remote control switch is set
correctly.
• The recording condition of the tape is very poor and
tracking cannot be adjusted or the NTSC system is
being used.
• Clean the cabinet, panel and controls with a dry, soft
cloth, or a soft cloth slightly moistened with a mild
detergent solution. Do not use any type of solvent,
such as alcohol or benzine.
Advertisement
Table of Contents
