Table of Contents
Advertisement
Additional tasks
To
Stop play
Pause play
Resume play after pause
Fast-forward the tape
Rewind the tape
Eject the tape
To replay a recently watched scene
You can immediately rewind and playback the scene you want to watch
again.
During playback, press REPLAY up to four times. The VCR rewinds the
tape about 10 seconds on the counter for each press of the button, and
restarts playback.
To play an NTSC-recorded tape
Set NTSC PB at the rear of the VCR according to the colour system of your
TV.
When your TV is
PAL only
PAL and NTSC
To use the time counter
At the point on the tape that you want to find later, press COUNTER RESET.
The counter in the display window resets to "0:00:00." Search for the point
afterwards by referring to the counter.
To display the counter on the TV screen, press DISPLAY.
Press
p STOP
P PAUSE
P PAUSE or Æ
PLAY
FF during stop
)#
REW during stop
03
6 EJECT
Set NTSC PB to
ON PAL TV
NTSC 4.43
continued
19
Basic Operations
Advertisement
Table of Contents
