Mechanical
7.
The following table defines the mechanical specifications of this product for both chassis and cabinet.
Parameter
Dimension (WXHXD)
Dimension without stand (WXHXD)
Net Weight
Gross Weight
Net weight *without* stand
Chassis Plastic Material
External Plastic Chassis Components
Exterior Chassis Color/Texture/Details
Chassis Component's Color Difference
Chassis Color Drift Due to UV-Light
Molded Plastic
Screen Printed Parts, Bird Logo Recess
Rear Label
Wall Mount
Sample
In addition, all exterior surfaces shall have uniform texture/color.
Painting chromatism and define: base, stand, outer bezel and speaker: GM black rear cover-GM black.
GAP:
1.
Panel spec :
Panel bucket to panel glass surface 2(+/-0.5) mm
The maximum acceptable gap between LCD panel and bezel shall be within 2.5mm.
Panel Section drawing
Environmental
8.
The following table defines the operational/storage conditions of the product.
Operating Temperature
Humidity
Altitude
Storage Temperature
Humidity
Altitude
ViewSonic Corporation
530 x 432 x 220 mm
530 x 394 x 68 mm
7.78 Kg
11.02 Kg
6.83 Kg
PC+ABS
Front bezel, Back Cover, Stand, Base, Lens and Button
Refer to Figure 1- Product ID
Refer to Figure 1A-Color Guide
None
Workmanship shall be inspected according to ViewSonic Molded
Plastic Parts Specification, VSCMPPSPEC001V1.2.
Artwork shall be provided and confirmed by ViewSonic.
A label identifying the product name, model/serial number and
FCC ID/Logo shall be placed into the rear label recess located on
the rear panel of the chassis.
100mmx100mm VESA high hole (n=4), 4mm, 0.7mm
pitch×10mm long screw mounting kit not included.
(M4*10)* 4pcs
100mm
Sample of textured color chips, plastic material specification,
and Material Safety Data Sheets shall be submitted to
ViewSonic prior to Mass Production Release.
0°C to 40°C
85% non-condensing
0 meter to +3000 meters above sea level
Follow Panel spec
85% non-condensing
0 meter to 12,000 meters above sea level
7
Specification
100mm
Confidential - Do Not Copy
N2201w-1M