CONTENTS Compliance Information ------------------------------------------------------- 1 Important Safety Instructuons ----------------------------------------------- 2 Copyright Information --------------------------------------------------------- 3 Product Registration ----------------------------------------------------------- 3 Antenna Installation Instructions-------------------------------------------- Quick Installation --------------------------------------------------------------- Using the Display (PC) -------------------------------------------------------- 6 PREPARTION ------------------------------------------------------------------ OPERATING INSTRUCTIONS Use of the remote control --------------------------------------------------- To use the menus ------------------------------------------------------------- 19 Main menu ---------------------------------------------------------------------- 19 CONNECT PERIPHERAL EQUIPMENT...
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Warning To assure continued FCC compliance, the user must use grounded power supply cord and the cables which are included with the equipment or specified.
, the three birds logo, OnView, ViewMatch, and ViewMeter are registered ® trademarks of ViewSonic Corporation. Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
LCD ® display screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the LCD display. ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners. ViewSonic N2050w...
Macintosh adapter. Attach the adapter to the computer and plug the video cable into the adapter. To order a ViewSonic® Macintosh adapter, contact ViewSonic Customer Support. 3 Turn ON LCD display and computer Turn ON the LCD display, then turn ON the computer.
2. Set the refresh rate: See your graphic card's user guide for instructions. WARNING : Do not set the graphics card in your computer to exceed the maximum refresh rate of 60Hz; doing so may result in permanent damage to your Display. ViewSonic N2050w...
PREPARATION Place the TV on a solid surface. Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover. To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity.
Page 10
Insert the power cord in the wall socket having an AC power supply. 5. Turn the TV on: Press the power button at the bottom of the bezel to turn it on. If the TV is in power off, the indicator in front of the TV illuminates yellow. ViewSonic N2050w...
Sets timer to turn off TV Adjust Volume Change channel for TV only Play/Stop/Pause/Record/Forward/ Rewind Shortcut buttons for: Videos, Music, Pictures and Radio Menu (Audio Selection – TV only) Close Caption (Back button - WMA only) Mute On/Off ViewSonic N2050w...
Page 12
Key “Defaults” The ‘default’ out of box setting enables the Remote to control a predetermine TV, DVD, STB, VCR, VPB, WMA and AUD. Depending on Device desire the following model will be active. • Device Note: Multiple pre-programmed codes are available for some devices; if default setting does not function, see pre-programmed table for additional codes.
________ AUX Key Setup The AUX key is used to operate a second TV, DVD, STB, VCR, VPB, WMA, and AUD. A fourth digit is necessary to identify the type of device the key will control. For example, to control a Sony DVD player with a code of 027 under the AUX key a 2 must be added in the beginning of the pre-programmed code making it 2027.
Page 14
To enter the pre-programmed code press and hold the AUX button for approximately six seconds. The top LED will turn on, enter the pre-programmed code with the first digit to indicate the type of device. LED will blink to indicate pre-programmed code was captured correctly. ViewSonic N2050w Button...
Black Level is adjusted from 0 to 100. Sharpness is adjusted from 0 to 10. You can adjust picture contrast, brightness, color, tint and sharpness to the levels you prefer. Reset is set up to default value. ADJUST ViewSonic N2050w...
Page 22
Bass and Treble are adjusted from 0 to 100. W-Head Phone (optional) is the function for wireless headphone enable or disable. You can adjust audio Volume, Balance, Bass and Treble to the levels you prefer. When adjust any item sub-OSD will show up like this. ViewSonic N2050w ADJUST...
Page 23
It’s allows you to read the dialog of television programs on the TV screen. Designed to help the hearing impaired, this feature uses on screen “ text boxes” to show dialogue and conversations while the TV program is in progress. Captions will appear on the screen only during captioned broadcasts.
Page 24
It is also possible to block all program viewing for a time period. There are two item could be defined. One is TV Guidelines another one is Movie Guidelines.
Page 25
CHANGE PIN Personal Identification Number is for change password to control the V- chip setup; it’s included three steps. ENTER PIN to enable this function, then ENTER NEW PIN to change a new one. After that COMFIRM NEW PIN. CHANGE PIN CHANGE PIN ADJUST ADJUST ADJUST ViewSonic N2050w...
Page 26
Sleep Timer It is for set a time period after which the TV should switch itself to standby. The counter runs from 0 > 30 > 60 > 90 > 120 minutes. The timer begins to count down from the number of minutes selected after the display has disappeared.
Page 27
Auto Adjust is the function auto-sizing for VGA input. Contrast, Brightness, Focus, Clock, H-Position, V-Position and Color Temp are the functions for PC adjustment. Color Temp for you can adjust the color temperature you prefer. ADJUST NORMAL ADJUST ViewSonic N2050w...
PREPARATION Remove the back plate at the back of the TV as shown on the illustration opposite. Lay the LCD TV with the screen down on a table, as it will be easier to connect your peripheral equipment. Please take your precautions not to damage the screen.
If you are using only mono equipment, connect only the VIDEO and the AUDIO L (Mono) ports. If your VCR has an S-VHS video jack: For improved picture quality, connect a S-Video cable with the S-VIDEO input on the TV instead of connecting the VCR to the VIDEO port of AV2.
TV. Connect the audio cables AUDIO AV ports on the TV. How to use Select COMPONENT. Turn on the DVD set. ViewSonic N2050w to the DVD player’s AUDIO L and R ports and to the L and R...
How to connect component video: Connect the three separate component video cables ports and to the Y, Pb and Pr ports on the TV. Connect the audio cables AUDIO AV ports on the TV. How to use Select COMPONENT.
MUTE key on the remote control works on both internal speaker and the earphone. Use volume key to adjust the volume. Note: When a TV channel or external AV source is blocked because of a rating set via the Parental control menu, also the headphone is muted.
TV again. *Check antenna connections at the rear of the TV to see if it is properly connected to the TV. *possible broadcast station trouble. Try another channel. *Adjust the contrast and brightness settings.
Note: You will need the product serial number. Country/ Web Site Region United States www.viewsonic.com/support Canada www.viewsonic.com/support Other Asia/ www.viewsonic.com.tw Pacific countries T=Telephone E-mail F=Fax T:(800) 688-6688 service.us@viewsonic.com F:(909) 468-1202 T:(800) 688-6688 service.ca@viewsonic.com F:(909) 468-1202 T:(886) 2 2246-3456 service.ap@viewsonic.com F:(886) 2 8242-3668 ViewSonic N2050w...
ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or arts may include remanufactured or refurbished parts or components.