Shooting Still Images ( Auto Mode); Avoiding Camera Shake - Canon PowerShot SD790 IS Digital ELPH User Manual

14
Shooting Still Images
Shooting Still Images
Power Button
Control Dial
1.
Press the power button.
• The start-up sound will play and the start-up image will display in
the LCD monitor.
• Pressing the power button again turns the power off.
2.
Select a shooting mode.
1. Set the mode switch to
(Shooting).
2. Turn the control dial to select
(Auto).
3.
Aim the camera at the subject.

Avoiding Camera Shake

Keep your arms tight against your body while
holding the camera firmly by the sides. Using
a tripod is also effective.
Use the wrist strap to avoid dropping
the camera during use.
4.
Press the shutter button lightly (press halfway) to set
the focus.
• When the camera focuses, it beeps twice and the indicator lights
green (orange when the flash fires).
( Auto Mode)
Shutter Button
Mode Switch
Wrist Strap
Indicator