Habitat Bocksey 909551 Manual page 2

EN
This manual contains important information that should be kept for
future reference.
Self-assembly.
Warning! Keep children away from the assembly area. Leave the
plastic bags out their reach. The small parts pose a choking hazard.
Material
SKU Structure/Shelf
811700
White lacquered medium density fiberboard
811701
Walnut veneered particle
811704
board lacquered matt.
Maple veneered particle
811706
board.
Maple veneered particle
811707
board
Oak veneered particle
811710
board.
Oak veneered particle
811711
board
Oak veneered particle
811713
board
Walnut veneered particle
811716
board.
Walnut veneered particle
811720
board.
Walnut veneered particle
811721
board.
811728
Anthracite lacquered medium density:
811729
811730
Assembly Instructions
Before beginning assembly, identify all components using the
manual.
In order not to lose components, do not throw the package before
completing the full assembly.
This product must be assembled by an adult.
Plan to assemble the furniture as near as possible to where it will be
installed. Assemble on a clean, flat surface.
Bocksey - 08/2021
Door
(MDF).
Walnut veneered
particle board
with front side
covered in brass.
Maple veneered
particle board
Solid maple.
NA
Oak veneered
particle board.
Solid oak.
NA
Walnut veneered
particle board.
Solid walnut.
fiberboard (MDF).
Recommendations for use
This product was designed for indoor use only.
The wood-based products, particle board, painted, varnished and /
or lacquers may emit an odor when opened. This smell disappears
after a few weeks if the room is properly ventilated.
Maintenance
In order not to damage the surface, it is recommended that you do
not place hot or humid object directly on the surface. Do not use
magazines or newspapers as trivets. The ink used may leave traces
that can permanently stain the furniture surface.
To avoid the appearance of marks, do not leave any stationary object
for more than 2 months.
Avoid placing furniture in the immediate vicinity of a heater or air
conditioner. The heat and humidity can cause cracks or deformities.
Any spills should be removed immediately with a cloth. Then wipe
the surface with a clean, dry cloth.
The use of furniture polishes is not necessary or recommended.
Clean plating using a soft, damp cloth. Then wipe with a dry cloth.
Do not use abrasive cleaners.
Clean with movements in the direction of wood fibers.
Keep the label with lot number, it may be useful in case of
BC
complaint.
If you have any comments or suggestions regarding this product,
assembly instructions or service received, please enquire at your
nearest store or contact us on our website at: www.habitat-design.com
or write to this address: HABITAT, 70 AVENUE VICTOR HUGO, 93300
AUBERVILLIERS FRANCE.
1