Removing Blockages - Vax VMP8PU User Manual

Maintenance

Removing blockages

WARNING: To reduce the risk of electric shock, turn the vacuum cleaner o and unplug from the electrical
socket before performing maintenance/troubleshooting checks.
Disconnect the hose from the vacuum cleaner and remove any blockages found then reconnect the hose securely.
Removing blockages from the brushbar
Unscrew the three screws
on the base of unit.
Removing blockages from the TurboTool
Turn the TurboTool over and slide o
the locking ring.
vax.com.au
(Keep your Vax as good as new)
Remove oor nozzle cover.
Detach lower housing and
remove blockage.
Lift brushbar.
To re-assemble the TurboTool, ensure
that the tabs are engaged and pivot
the lower housing closed.
Slip the locking ring over the neck
of the TurboTool and into the groove
to nish.
Remove the belt from the
end of the brushbar.
10