Dvd Recorder - Sony RDR-HX820 Operating Instructions Manual

2
With the TV [/1 button pressed down,
enter the TV's manufacturer code
using the number buttons.
For instance, to enter "09," press "0" then
"9." After you enter the last number,
release the TV [/1 button.
Code numbers of controllable TVs
If more than one code number is listed,
try entering them one at a time until you
find the one that works with your TV.
Manufacturer
Sony
Hitachi
JVC
Panasonic
Philips
Samsung
Sanyo
Thomson
Toshiba
The remote performs the following:
Buttons
TV [/1
TV 2 (volume)
+/–
TV PROG +/–
TV t
To operate the TV/DVD button (for SCART
connections only) (available in Europe
only)
The TV/DVD button switches between the
recorder and the last input source selected on
the TV. Point your remote at the recorder
when using this button.
When you connect the recorder to the TV via
the SCART jacks, the input source for the TV
is set to the recorder automatically when you
start playback. To watch another source,
press the TV/DVD button to switch the TV's
input source.
Code number
01 (default)
24
33
17, 49
06, 08
71
25
43
38
Operations
Turns your TV on or
off
Adjusts the volume
of your TV
Selects the
programme position
on your TV
Switches your TV's
input source
If you have a Sony DVD player
or more than one Sony DVD
recorder
If the supplied remote interferes with your
other Sony DVD recorder or player, set the
command mode number for this recorder and
the supplied remote to one that differs from
the other Sony DVD recorder or player after
you have completed "Step 6: Easy Setup."
The default command mode setting for this
recorder and the supplied remote is DVD3.
Number
buttons
SYSTEM
MENU
1
Check that "Easy Setup" (page 21)
has been finished. If "Easy Setup" has
not been finished, first perform "Easy
Setup."
2
Press SYSTEM MENU.
The System Menu appears.
3
Select "SETUP," and press ENTER.
M/m,
ENTER
19
,continued