Wi-Fi Direct; Vpn - Samsung PH-P600 User Manual

2. Tap Tethering > Help.

Wi-Fi Direct

Wi-Fi Direct allows device-to-device connections so you can transfer large amounts of data over
a Wi-Fi connection.
Activate a Connection
1. Press and tap
2. Tap the ON/OFF slider to turn Wi-Fi direct On .
3. Tap Wi-Fi Direct to set up a peer-to-peer connection over Wi-Fi. While Wi-Fi Direct
mode is On,
Note: The target device must also have Wi-Fi Direct service active and running before it can
be detected by your device.
Assign a Unique Name
1. Press and tap
2. Tap > Device name.
3. Modify the current name and then tap OK.

VPN

If you want to send and receive email messages through an ISP (Internet Service Provider)
account (such as Outlook), or if you wish to use your device to access your corporate email
through a VPN (Virtual Private Network), you will first need to set up an IMAP or POP account.
Before you add a VPN you must determine which VPN protocol to use: PPTP, L2TP/IPSec
PSK, L2TP/IPSec RSA, IPSec Xauth PSK, IPSec Xauth RSA, or IPSec Hybrid RSA.
Note: You must configure a PIN or alphanumeric password before using credential storage
functions.
1. Press and tap
2. Tap VPN > Add VPN network.
3. Enter a name for the VPN network in the Name field.
DRAFT For Internal Use Only
4. Select a VPN type from the Type drop-down menu. The options are:
Settings
> > More settings.
Wi-Fi Direct is on displays in the Status
> > More settings > Wi-Fi Direct.
> > More settings.
bar.
35