Sony SS-TW100ED Installation Manual page 3

SS-TW100ED Features
A super-tweeter for ultra-high frequency
reproduction
The SS-TW100ED is a super-tweeter with the capability to
reproduce extremely high frequencies of up to 100 kHz,
making it suitable for next-generation sound systems.
Adjustable speaker angle for optimum effect
Because of the high directivity of frequencies greater than
20 kHz, the super-tweeter can be laterally adjusted by up
to ±15 degrees.
Structually designed for ultra-high frequency
reproduction
• A spherical aluminum housing for minimal sound
diffraction
• A carbon-graphite composite hard-dome diaphragm for
lightness and high rigidity
High-quality network box as standard accessory
The supplied network box allows you to make terminal
selections without the signal degradation that normally
occurs when selecting cut-off frequencies with a
conventional switch.
To obtain the best possible
sound quality
Positioning the super-tweeter
• Place the super-tweeter on the top of your speaker
cabinet. The top of your speaker cabinet should be
completely level.
• To ensure the proper time alignment of your speaker
systems, position the super-tweeter unit so that it lies on
the same line as the tweeter units in the speaker system
that you are using.
Adjusting the orientation
Since high frequencies above 20 kHz have extreme
directivity, the super-tweeter is designed to be laterally
adjustable by up to ±15 degrees (though it is normally set
at 0 degree), allowing you to direct it exactly towards the
listening position.
15º
0º
15º
GB
3 GB