Getting Started; Using The Battery - Samsung SPH-A940 User Manual

Hide thumbs Also See for SPH-A940:
Table of Contents

Advertisement

Getting started

Using the battery

Your phone is powered by a rechargeable Li-ion
battery. Use only approved batteries and
chargers. Ask your local Samsung dealer for
further details.
Note: You must fully charge the battery before using
your phone for the first time.
Installing the battery
1. Place the battery so that the tabs on the end
align with the slots at the bottom of the phone.
2. Press the battery until it clicks into place. Make
sure that the battery is properly installed
before switching the phone on.
Removing the battery
1. If necessary, switch off the phone by pressing
and holding the END key until the power-off
image displays.
2. Slide the battery lock towards the top of the
phone and lift away the battery, as shown.
1. With the battery in position on the phone, plug
the connector of the travel adapter into the
jack at the bottom of the phone.
14
Low battery indicator
When the battery is weak and only a few minutes
of talk time remain, a warning tone sounds and a
message repeats at regular intervals on the
display. In this case, your phone turns off the
backlight to conserve the remaining battery
power.
When the battery level becomes too low, the
phone automatically turns off.
Getting started
15

Advertisement

Table of Contents
loading

Table of Contents