Note:
1. RTL (Retention Time Limited)
The marking (RTL) indicates that the Retention Time is limited for this
item.
After the discontinuation of this assembly in production, the item will
continue to be available for a specific period of time. The retention
period of availability depends on the type of assembly and the laws
governing parts and product retention. At the end of this period, the
assembly will no longer be available.
2. Important safety notice
Components identified by the mark indicates special characteristics
important for safety. When replacing any of these components, only
use specified manufacture's parts.
3. The S mark means the part is one of some identical parts. For that
reason, it may be different from the installed part.
4. ISO code (Example: ABS-94HB) of the remarks column shows quality
of the material and a flame resisting grade about plastics.
5. RESISTORS & CAPACITORS
Unless otherwise specified;
All resistors are in ohms ( ), k=1000 , M=1000k
All capacitors are in MICRO FARADS ( F), p= ( F)
*Type & Wattage of Resistor
27.1. ACCESSORIES AND PACKING MATERIALS
129