System Specification - scope Connexions CX5E Installation & User Manual

ConneXions CX5 Mains, Multi Port Version
Mains Input:
System Operating Voltage:
System Power Consumption:
Transmitter:
Power output:
Frequency Range:
Channel Spacing:
Adjacent Channel:
TX Baud Rate:
RF Standards applied:
EMC Standard applied:
Safety Standard applied:
General:
Ports:
Comms Baud Rate:
Footprint (mm):
*dependent on system configuration
excluding aerial
** subject to applicable country's licencing conditions
Scope's policy is one of continuous development and specifications are subject to change without notice
CX5red
www.acornfiresecurity.com

System Specification

100-240V ac 0.8A 50/60 Hz
13.8V dc
less than 50mA standby, up to 2.4A (transmit)
0.1W to 5W (2W ERP max for UK)**
446-464 MHz**
12.5 KHz
better than 200nW @ 4.5 KHz deviation
512 or 1200
EN 300 224 V2.1.1 (2017-06)
EN 301 489-2 V2.1.0 (2017-03)
EN 60950-1:2006 + A2:2013
RS232 serial on COM1, COM2 and COM3
USB. 8 way dry contact I/F
600 to 9600 software adjustable*
330 (L) x 190 (W) x 70 (D) max
Page 11 of 13
www.acornfiresecurity.com
Issue 2