Pacific RL120 Manual

Pacific
RL120
Water Cooling Kit
Cautions: Make sure there's enough space when you start set up the LCS product
Radiators
To ensure a clean loop,
flush and rinse your radiators
and water blocks with
distilled water before using.
Make sure the fittings are
screwed securely when
placing them onto
the radiator.
Water Blocks
Attach the fittings to the inlet and
outlet of the waterblock.
Attach the waterblock onto the
motherboard by referring to the
enclosed manual.
1
Place the motherboard into the case.
Water Cooling Kit
This product is intended for installation only by expert users. Please consult with a qualified technician for
installation. Improper installation may result in damage to your equipment.
1. Please carefully read the manual before beginning the installation process !
2. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000.
3. DO NOT USE any kind of alcohol or alcohol derivatives with this reservoir or the acrylic tube may crack
and fail ! Do not clean it using alcohol either !

Before Installation

Installation Walkthrough

Case Fan
Attach the fans to the radiator
Pump and Reservoir
Attach fittings onto the pump
and reservoir
(Example: Core V51)
2
Position the radiator.
3
Attach the pump and reservoir into
the chosen locations.