Honeywell HS-0016 Owner's Manual page 4

ASSEMBLY INSTRUCTIONS
FRONT GRILLE
STAND FAN ASSEMBLY INSTRUCTIONS
• Insert the long Metal Pole
into the Base (A) by lining
up the Recessed Slot (B) in
the Metal Pole to the
Raised Dot (C) on the Base
and push in until it is fully
seated. Hold the Base
firmly and twist the Metal
Pole CLOCKWISE 90˚ until
it stops (Fig. 1).
TABLE FAN ASSEMBLY INSTRUCTIONS
• Insert the Motor Assembly
into the Base (A) by lining
up the Recessed Slot (B) in
the Motor Assembly to the
Raised Dot (C) on the Base
and push in until fully
seated.
Fig. 1
B
C
BLADE KNOB
SCREW
FAN
BLADE
GRILLE
RING
• Attach the Motor
Assembly (D) by lining up
the Arrow on the Motor
Assembly (E) to the
Recessed Slot (F) on the
top of the Metal Pole and
pushing it on until it is fully
seated. Twist the Motor
Assembly CLOCKWISE 90˚
until it stops (Fig. 2).
• Hold the Base firmly and
twist the Metal Pole
CLOCKWISE 90˚ until it
stops (Fig. 1). Go to Grille
Assembly Instructions.
Fig. 2
A
D
METAL
POLE
REAR GRILLE
REAR GRILLE
MOUNTING
NUT
BASE
E
F
MOTOR
ASSEMBLY
METAL
POLE