Table of Contents
Advertisement
Assembly
1
Installing the tip restraint hardware
□
Drill a hole on the wall in the desired location place the plastic plug (EE) into the predrilled hole on the wall.
□
Attach a bracket (AA) securely to the back top rail of the linen cabinet (A) by using the short screw (DD) provided through the smaller
hole.
□
Install a bracket (AA) on the wall over a wall stud and 2 inches below the mounting bracket secured to the back of the linen cabinet (A).
Attach the bracket (AA) to the wall stud by using the plastic plug (EE) and long screw (CC) provided through the smaller hole.
□
Place the linen cabinet (A) into position so both mounting brackets are vertically in line.
□
Lace the end of the restraint strap (BB) through the larger hole in each mounting bracket (AA). Bring both ends together and slide the
flat end through the locking end and draw it through until all slack is removed.
□
Confirm that the strap is securely laced and locked.
(please install by 2 people at least)
7
Please contact 1-800-998-7021 for further assistance.
HOMEDEPOT.COM/HOMEDECORATORS
Advertisement
Table of Contents
