5HFRUGLQJ DQ (&*
127(
PageWriter 100 M1772A Cardiograph
This chapter describes how to prepare the patient for an ECG, record an
ECG, understand the printed report, and change the ECG report format.
Samples of the Auto and different Manual report formats are also
shown.
If the cardiograph has not been setup, refer to Appendix A for
instructions.
The basic steps and procedures for recording an ECG are as follows:
1. If the cardiograph is not On, press
2. Prepare the patient and apply the electrodes, as described in the
"Preparing the Patient" section.
$XWR
3. Press
or
4. Check the quality of the recorded ECG on the printed report.
The rest of this chapter discusses the details of setting up and recording
ECGs and understanding the printed report.
0DQXDO
to record the ECG.
2Q6WDQGE\
.
2-1