Samsung ET-WV530 User Manual page 20

Internet Connection Type: Dynamic IP (DHCP)
Select Dynamic IP (DHCP) from the drop-down menu to obtain IP Address information automatically from your ISP. Select
this option if your ISP does not give you any IP numbers to use. This option is commonly used for cable modem services.
The following parameters can be configured:
Host Name:
Primary DNS Server:
Secondary DNS Server:
MTU:
MAC Address:
Click on the Save Settings button to accept the changes made.
Click on the Don't Save Settings button to discard the changes made.
S W R
AMSUNG IRELESS OUTER
The Host Name is optional but may be required by some ISPs. Leave blank if you are not
sure.
Enter the Primary DNS IP address used here.
Enter the Secondary DNS IP address used here. This field is normally optional. Only one
DNS address is required for a functional Internet connection, but using a second DNS
address provides more stability.
Maximum Transmission Unit - you may need to change the MTU for optimal performance
with your specific ISP. 1500 is the default MTU.
The default MAC Address is set to the Internet port's physical interface MAC address on
the Broadband Router. It is not recommended that you change the default MAC address
unless required by your ISP. You can use the Clone Your PC's MAC Address button to
replace the Internet port's MAC address with the MAC address of your Ethernet card.
U M
SER ANUAL
P 20
AGE