Advertisement
Outdoor Amplified Systems:
Amplifier connections are clearly labeled on the amplifier unit as shown below.
1. Connect the Antenna to the Amplifier output labeled "ANTENNA"
2. Connect the DC Injector output labeled "TO AMPLIFIER" to the Amplifier input labeled
"RADIO"
3. Connect the Radio to the DC Injector input labeled "RADIO" using a pigtail cable.
4. Plug the AC Adapter into the DC Injector's DC power jack and wall outlet.
Proceed to USB Adapter/Software Installation section.
WWW.L-COM.COM E-MAIL: SALES@L-COM.COM PHONE: 1-800-343-1455 FAX: 1-978-689-9484
© L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com logo are registered marks.
L-COM, INC. 45 BEECHWOOD DRIVE NORTH ANDOVER, MA 01845
Advertisement
