Advertisement
When locating the antenna or operating this device you must observe the following exposure limits:
When this device is installed either as a fixed-mount or mobile application there is a
minimum required separation distance of 20 cm from users.
Non-Amplified Systems:
For non-amplified systems simply attach the antenna into the antenna port on the USB adapter and
proceed to USB Adapter Installation section.
Indoor Amplified Systems:
Amplifier connections are clearly labeled on the amplifier unit as shown below.
1. Connect the Antenna to the Amplifier output labeled "ANTENNA"
2. Connect the Radio to the Amplifier input labeled "RADIO" using a pigtail cable.
3. Plug the AC Adapter into the Amplifier's DC power jack and wall outlet.
Proceed to USB Adapter/Software Installation section.
WWW.L-COM.COM E-MAIL: SALES@L-COM.COM PHONE: 1-800-343-1455 FAX: 1-978-689-9484
© L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com logo are registered marks.
L-COM, INC. 45 BEECHWOOD DRIVE NORTH ANDOVER, MA 01845
Advertisement
